electrolux 11
Fill the detergent dispenser with detergent before you set a new washing programme.
Interrupting a washing programme
Open the door.
•The programme stops. Close the door.
•The programme continues from the point of interruption.
Setting and starting a washing programme with delay start
1.Press the on/off button.
2.Set a washing programme.
3.Press the delay start button until the dis- play shows on flashing the necessary de- lay start of the washing programme.
–The delay start indicator light comes on.
4.Close the door.
–The number on the display comes on with fixed light.
–The countdown of the delay start starts.
–The countdown of the delay start de- creases with steps of 1 hour.
–When the countdown is completed, the washing programme starts auto- matically.
Do not open the door during the count- down to prevent interruption of the countdown. When you close the door again, the countdown continues from the point of interruption.
Cancelling a delay start:
1.Press and hold function buttons B and C until all the programme lights come on.
–When you cancel a delay start, you also cancel the washing programme.
2.Set a new washing programme.
Care and cleaning
You can select the washing programme and delay start also with the door closed. When you press a programme button you have only 3 seconds to select a dif- ferent washing programme or a delay start. After these 3 seconds, the selec- ted programme starts automatically.
End of the washing programme
Switch off the appliance in these conditions:
•The appliance stops automatically.
•The display shows 0.
•The end of programme indicator light comes on.
1.Press the on/off button.
2.Open the door.
3.For better drying results, keep the door ajar for some minutes before you remove the dishes.
Let the dishes cool down before you remove them from the appliance. Hot dishes are easily damaged.
If the save energy function is set, dishes can be wet once the programme finish- ed. We recommend to leave the appli- ance door ajar so that dishes can dry naturally.
Standby mode
If you do not switch off the appliance at the end of the washing programme, the appli- ance automatically goes into standby mode. The standby mode decreases energy con- sumption.
Three minutes after the end of the pro- gramme, all indicator lights go off and the digital display shows one horizontal bar. Press one of the buttons (not the on/off but- ton), to go back to
Warning! Switch the appliance off before you clean the filters.
Cleaning the filters
Caution! Do not use the appliance without filters. Make sure that the installation of the filters is correct. Incorrect installation will cause
unsatisfactory washing results and damage to the appliance.
The dishwasher has 2 filters:
1.microfilter
2.flat filter