Electrolux ESI 6105 manual Maintenance and cleaning, Cleaning the filters, Frost precautions

Page 14

Maintenance and cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....).

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash programme without dishes using detergent.

Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.

Cleaning the filters

The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result.

1.Open the door, remove the lower basket.

2.The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter (C).

Unlock the filter system using the handle on the microfilter, and remove.

Attention!

Under no circumstances may the dishwasher be used without filters.

Incorrect repositioning and fitting of the filters will produce poor washing results.

NEVER try to remove the upper spray arm.

If residues of soil have clogged the holes in the upper spray arm, remove them with a cocktail stick.

Prolonged periods of non-operation

If you are not using the machine for any period of time you are advised to:

1.Unplug the appliance and then turn off the water.

2.Leave the door ajar to prevent the formation of any unpleasant smells.

3.Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it.

3.Turn the handle about 1/4 a turn anticlockwise and remove.

4.Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B).

5.Clean all filters thoroughly under running water.

6.Remove the flat filter (C) from the base of the washing compartment and clean both faces thoroughly.

7.Put the flat filter (C) back in the base of the washing compartment.

8.Place the coarse filter (A) in the microfilter (B) and press together.

9.Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment.

Moving the machine

If you have to move the machine (moving house etc....):

1. Unplug it.

2.Turn the water tap off.

3.Remove the water inlet and discharge hoses.

4.Pull the machine out together with the hoses. Avoid over tilting the machine during transportation.

14

Image 14
Contents S h w a s h e r Contents Child safety Safety instructionsInstallation DisposalDescription of the appliance Delay start button Start/cancel button Control panelWater hardness Adjustment Number Use Prior to using for the first timeSetting manually Water softenerRinse aid Adjusting the doseFilling with dishwasher salt Filling with rinse aidLower basket Daily useLoading cutlery and dishes Cutlery basketTo move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket Use of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Combi detergentsWashing programmes End of the washing programme To interrupt or cancel a washing programme in progressStarting a washing programme Unloading the dishwasherFrost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFault code / malfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Malfunction Possible cause SolutionsDishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentEuropean Guarantee Guarantee ConditionsStandard Guarantee Conditions ExclusionsLevelling Installation instructionsBuilding-in Fixing to the adjacent unitsGreen and Yellow Earth Blue- Neutral Brown- Live Water outlet hose connectionElectrical connection Proceed as followsHints for test centres Cup racks position aPage Page Electrolux plc

ESI 6105 specifications

The Electrolux ESI 6105 is a sophisticated and efficient built-in dishwasher designed to meet the demands of modern households. With a sleek design and an array of advanced features, this model stands out in the competitive market of kitchen appliances.

One of the main features of the ESI 6105 is its impressive energy efficiency. It boasts an A+ energy rating, which not only helps to reduce electricity bills but also minimizes environmental impact. This appliance is designed to use less water and energy than previous models, making it an eco-friendly choice for environmentally conscious consumers.

The ESI 6105 includes a spacious interior that can hold up to 13 place settings, making it ideal for families or those who frequently host gatherings. The adjustable top basket allows for flexibility when loading larger items, such as pots and pans, ensuring every dish can be cleaned thoroughly. Additionally, the bottom basket features a unique design that accommodates various dish sizes and shapes, maximizing the dishwasher’s capacity.

This model is equipped with several advanced technologies that enhance its performance and usability. The inbuilt AutoFlex technology automatically adjusts the washing program based on the load size and type. This ensures optimal water usage and energy consumption, providing a customized wash for every load. Additionally, the ESI 6105 features a Quiet Operation mode, which significantly reduces noise levels, allowing users to run the dishwasher at any time without disruption.

The Electrolux ESI 6105 has several wash programs, including intensive, eco, and quick wash options, catering to different cleaning needs. The quick wash cycle, in particular, is a favorite for busy households, providing a fast yet effective clean for lightly soiled dishes.

For added convenience, the ESI 6105 is fitted with a delay start function, allowing users to set the dishwasher to begin a wash cycle at a later time, aligning with their schedules. It also incorporates a status indicator that provides real-time updates on the washing cycle, ensuring users are always aware of when their dishes will be clean and ready.

Overall, the Electrolux ESI 6105 combines efficiency, innovative technology, and practicality into one compact design. Its range of features and user-friendly interfaces makes it an excellent choice for anyone looking to streamline their dishwashing routine while ensuring top-quality cleaning performance.