Electrolux ESI 6105 manual Something not working, Flashing fault code appears

Page 15

Something not working

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer.

Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is in guarantee.

...a flashing fault code appears

The dishwasher will not start or stops during operation.

The intervention of an alarm is indicated by:

-continuous flashing of the start/cancel indicator light,

-a combination of flashing and pauses of the end of cycle indicator light (as described in the chart).

Open the door and carry out the following suggested corrective actions.

Fault code / malfunction

Possible cause

Solutions

 

 

 

 

 

- continuous flashing of the

The water tap is blocked or furred with

Clean the water tap.

"start/cancel" indicator light

limescale.

 

 

 

 

 

 

 

- 1 flash of the "end of cycle"

The water tap is turned off.

Turn the water tap on.

indicator light

 

 

 

 

 

The filter (where present) in the threaded hose

Clean the filter in the threaded hose

 

 

The machine does not fill with

 

fitting at the water inlet valve is blocked.

fitting.

 

 

 

 

 

The water inlet hose has not been correctly laid

Check the water inlet hose connection.

water.

 

 

or it is bent or squashed.

 

 

 

 

 

 

 

- continuous flashing of the

The sink spigot is blocked.

Clean out the sink spigot.

"start/cancel" indicator light

 

 

 

 

 

 

 

- 2 flashes of the "end of cycle"

The water drain hose has not been correctly laid

Check the water drain hose connection.

indicator light

or it is bent or squashed.

 

 

The dishwasher will not drain.

 

 

 

 

 

 

- continuous flashing of the

Anti-flood device is activated.

Close the water tap and contact the

"start/cancel" indicator light

 

Service Force Centre.

- 3 flashes of the "end of cycle"

 

 

 

indicator light

 

 

 

 

 

 

 

 

Once these checks have been carried out; close the door and press the start/cancel button. The programme will continue from the point at which it was interrupted. If the fault code reappears contact the Service Force Centre.

For other combinations of fault codes not described in the above chart, please contact your Service Force Centre.

...there are problems when operating the dishwasher

Malfunction

Possible cause

Solutions

 

 

 

 

 

 

The dishwasher door has not been properly

Close the door.

 

 

closed.

 

 

 

 

 

 

 

The main plug is not plugged in.

Insert the mains plug.

The programme does not start

 

 

 

 

The fuse has blown in the household fuse box.

Replace the fuse.

 

 

 

 

 

 

 

 

For dishwasher models with delay start

If dishes are to be washed immediately,

 

 

option:

cancel the delay start.

 

 

Delay start has been selected.

 

 

 

 

There is a whistling noise during

The whistling is not a cause for concern.

Use a different brand of detergent.

washing

 

 

 

 

 

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents S h w a s h e r Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Control panel Delay start button Start/cancel buttonWater softener Prior to using for the first timeSetting manually Water hardness Adjustment Number UseFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidCutlery basket Daily useLoading cutlery and dishes Lower basketAdjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows Fill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Unloading the dishwasher To interrupt or cancel a washing programme in progressStarting a washing programme End of the washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsMalfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresPage Page Electrolux plc

ESI 6105 specifications

The Electrolux ESI 6105 is a sophisticated and efficient built-in dishwasher designed to meet the demands of modern households. With a sleek design and an array of advanced features, this model stands out in the competitive market of kitchen appliances.

One of the main features of the ESI 6105 is its impressive energy efficiency. It boasts an A+ energy rating, which not only helps to reduce electricity bills but also minimizes environmental impact. This appliance is designed to use less water and energy than previous models, making it an eco-friendly choice for environmentally conscious consumers.

The ESI 6105 includes a spacious interior that can hold up to 13 place settings, making it ideal for families or those who frequently host gatherings. The adjustable top basket allows for flexibility when loading larger items, such as pots and pans, ensuring every dish can be cleaned thoroughly. Additionally, the bottom basket features a unique design that accommodates various dish sizes and shapes, maximizing the dishwasher’s capacity.

This model is equipped with several advanced technologies that enhance its performance and usability. The inbuilt AutoFlex technology automatically adjusts the washing program based on the load size and type. This ensures optimal water usage and energy consumption, providing a customized wash for every load. Additionally, the ESI 6105 features a Quiet Operation mode, which significantly reduces noise levels, allowing users to run the dishwasher at any time without disruption.

The Electrolux ESI 6105 has several wash programs, including intensive, eco, and quick wash options, catering to different cleaning needs. The quick wash cycle, in particular, is a favorite for busy households, providing a fast yet effective clean for lightly soiled dishes.

For added convenience, the ESI 6105 is fitted with a delay start function, allowing users to set the dishwasher to begin a wash cycle at a later time, aligning with their schedules. It also incorporates a status indicator that provides real-time updates on the washing cycle, ensuring users are always aware of when their dishes will be clean and ready.

Overall, the Electrolux ESI 6105 combines efficiency, innovative technology, and practicality into one compact design. Its range of features and user-friendly interfaces makes it an excellent choice for anyone looking to streamline their dishwashing routine while ensuring top-quality cleaning performance.
Top Page Image Contents