Electrolux ESI 6105 Installation instructions, Building-in, Levelling, Water supply connections

Page 19

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Building-in

This dishwasher is designed to be fitted under a kitchen counter or worksurface.

Attention!

Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel.

No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through.

The dishwasher incorporates adjustable feet to allow the adjustment of the height.

During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

When inserting the machine, ensure that the water inlet hose, the drain hose and the supply cable are not kinked or squashed.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Fixing to the adjacent units

The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used with another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

19

Image 19
Contents S h w a s h e r Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Control panel Delay start button Start/cancel buttonWater softener Prior to using for the first timeSetting manually Water hardness Adjustment Number UseFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidCutlery basket Daily useLoading cutlery and dishes Lower basketUpper basket Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Unloading the dishwasher To interrupt or cancel a washing programme in progressStarting a washing programme End of the washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsMalfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresPage Page Electrolux plc

ESI 6105 specifications

The Electrolux ESI 6105 is a sophisticated and efficient built-in dishwasher designed to meet the demands of modern households. With a sleek design and an array of advanced features, this model stands out in the competitive market of kitchen appliances.

One of the main features of the ESI 6105 is its impressive energy efficiency. It boasts an A+ energy rating, which not only helps to reduce electricity bills but also minimizes environmental impact. This appliance is designed to use less water and energy than previous models, making it an eco-friendly choice for environmentally conscious consumers.

The ESI 6105 includes a spacious interior that can hold up to 13 place settings, making it ideal for families or those who frequently host gatherings. The adjustable top basket allows for flexibility when loading larger items, such as pots and pans, ensuring every dish can be cleaned thoroughly. Additionally, the bottom basket features a unique design that accommodates various dish sizes and shapes, maximizing the dishwasher’s capacity.

This model is equipped with several advanced technologies that enhance its performance and usability. The inbuilt AutoFlex technology automatically adjusts the washing program based on the load size and type. This ensures optimal water usage and energy consumption, providing a customized wash for every load. Additionally, the ESI 6105 features a Quiet Operation mode, which significantly reduces noise levels, allowing users to run the dishwasher at any time without disruption.

The Electrolux ESI 6105 has several wash programs, including intensive, eco, and quick wash options, catering to different cleaning needs. The quick wash cycle, in particular, is a favorite for busy households, providing a fast yet effective clean for lightly soiled dishes.

For added convenience, the ESI 6105 is fitted with a delay start function, allowing users to set the dishwasher to begin a wash cycle at a later time, aligning with their schedules. It also incorporates a status indicator that provides real-time updates on the washing cycle, ensuring users are always aware of when their dishes will be clean and ready.

Overall, the Electrolux ESI 6105 combines efficiency, innovative technology, and practicality into one compact design. Its range of features and user-friendly interfaces makes it an excellent choice for anyone looking to streamline their dishwashing routine while ensuring top-quality cleaning performance.