Electrolux ESI 6105 Filling with dishwasher salt, Rinse aid, Filling with rinse aid, To fill

Page 7

Filling with dishwasher salt

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the complete washing programmes.

This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.

2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

3. Using the funnel provided,

pour in the salt until the container is full.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5. Replace on the cap tightly turning it clockwise until it stops with a click.

The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1.Open the container by pressing the release button (A).

2.Add the rinse aid until the container is completely full. The maximum level for filling is indicated by "max".

Ensure that the lid is closed after every refill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Adjusting the dose

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position

6 maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Top up the rinse aid when the indicator light on the control panel illuminates.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents S h w a s h e r Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Control panel Delay start button Start/cancel buttonWater softener Prior to using for the first timeSetting manually Water hardness Adjustment Number UseFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidCutlery basket Daily useLoading cutlery and dishes Lower basketUpper basket Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Unloading the dishwasher To interrupt or cancel a washing programme in progressStarting a washing programme End of the washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsMalfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeFixing to the adjacent units Installation instructionsBuilding-in LevellingProceed as follows Water outlet hose connectionElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveCup racks position a Hints for test centresPage Page Electrolux plc

ESI 6105 specifications

The Electrolux ESI 6105 is a sophisticated and efficient built-in dishwasher designed to meet the demands of modern households. With a sleek design and an array of advanced features, this model stands out in the competitive market of kitchen appliances.

One of the main features of the ESI 6105 is its impressive energy efficiency. It boasts an A+ energy rating, which not only helps to reduce electricity bills but also minimizes environmental impact. This appliance is designed to use less water and energy than previous models, making it an eco-friendly choice for environmentally conscious consumers.

The ESI 6105 includes a spacious interior that can hold up to 13 place settings, making it ideal for families or those who frequently host gatherings. The adjustable top basket allows for flexibility when loading larger items, such as pots and pans, ensuring every dish can be cleaned thoroughly. Additionally, the bottom basket features a unique design that accommodates various dish sizes and shapes, maximizing the dishwasher’s capacity.

This model is equipped with several advanced technologies that enhance its performance and usability. The inbuilt AutoFlex technology automatically adjusts the washing program based on the load size and type. This ensures optimal water usage and energy consumption, providing a customized wash for every load. Additionally, the ESI 6105 features a Quiet Operation mode, which significantly reduces noise levels, allowing users to run the dishwasher at any time without disruption.

The Electrolux ESI 6105 has several wash programs, including intensive, eco, and quick wash options, catering to different cleaning needs. The quick wash cycle, in particular, is a favorite for busy households, providing a fast yet effective clean for lightly soiled dishes.

For added convenience, the ESI 6105 is fitted with a delay start function, allowing users to set the dishwasher to begin a wash cycle at a later time, aligning with their schedules. It also incorporates a status indicator that provides real-time updates on the washing cycle, ensuring users are always aware of when their dishes will be clean and ready.

Overall, the Electrolux ESI 6105 combines efficiency, innovative technology, and practicality into one compact design. Its range of features and user-friendly interfaces makes it an excellent choice for anyone looking to streamline their dishwashing routine while ensuring top-quality cleaning performance.
Top Page Image Contents