Electrolux ESI 6105 manual Water outlet hose connection, Electrical connection, Proceed as follows

Page 20

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

Electrical connection

This appliance must be earthed.

The manufacturer declines any responsibility should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the terminal

in the plug which is marked with the letter "E" or the earth

symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We advise you therefore to remove it.

E

13 A

L

N

CE04

The plug moulded onto the lead incorporates a 13amp BSI362 fuse. Only ASTA or BSI fuses should be used.

The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.

A replacement cover/carrier must be obtained from your local Service Force Centre.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact your local Service Force Centre.

Warning!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents S h w a s h e r Contents Safety instructions InstallationChild safety DisposalDescription of the appliance Delay start button Start/cancel button Control panelPrior to using for the first time Setting manuallyWater hardness Adjustment Number Use Water softenerAdjusting the dose Filling with dishwasher saltRinse aid Filling with rinse aidDaily use Loading cutlery and dishesLower basket Cutlery basketTo move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket Use of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes To interrupt or cancel a washing programme in progress Starting a washing programmeEnd of the washing programme Unloading the dishwasherMaintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsDishes are not clean Wash results are not satisfactoryDishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentGuarantee Conditions Standard Guarantee ConditionsEuropean Guarantee ExclusionsInstallation instructions Building-inLevelling Fixing to the adjacent unitsWater outlet hose connection Electrical connectionGreen and Yellow Earth Blue- Neutral Brown- Live Proceed as followsHints for test centres Cup racks position aPage Page Electrolux plc

ESI 6105 specifications

The Electrolux ESI 6105 is a sophisticated and efficient built-in dishwasher designed to meet the demands of modern households. With a sleek design and an array of advanced features, this model stands out in the competitive market of kitchen appliances.

One of the main features of the ESI 6105 is its impressive energy efficiency. It boasts an A+ energy rating, which not only helps to reduce electricity bills but also minimizes environmental impact. This appliance is designed to use less water and energy than previous models, making it an eco-friendly choice for environmentally conscious consumers.

The ESI 6105 includes a spacious interior that can hold up to 13 place settings, making it ideal for families or those who frequently host gatherings. The adjustable top basket allows for flexibility when loading larger items, such as pots and pans, ensuring every dish can be cleaned thoroughly. Additionally, the bottom basket features a unique design that accommodates various dish sizes and shapes, maximizing the dishwasher’s capacity.

This model is equipped with several advanced technologies that enhance its performance and usability. The inbuilt AutoFlex technology automatically adjusts the washing program based on the load size and type. This ensures optimal water usage and energy consumption, providing a customized wash for every load. Additionally, the ESI 6105 features a Quiet Operation mode, which significantly reduces noise levels, allowing users to run the dishwasher at any time without disruption.

The Electrolux ESI 6105 has several wash programs, including intensive, eco, and quick wash options, catering to different cleaning needs. The quick wash cycle, in particular, is a favorite for busy households, providing a fast yet effective clean for lightly soiled dishes.

For added convenience, the ESI 6105 is fitted with a delay start function, allowing users to set the dishwasher to begin a wash cycle at a later time, aligning with their schedules. It also incorporates a status indicator that provides real-time updates on the washing cycle, ensuring users are always aware of when their dishes will be clean and ready.

Overall, the Electrolux ESI 6105 combines efficiency, innovative technology, and practicality into one compact design. Its range of features and user-friendly interfaces makes it an excellent choice for anyone looking to streamline their dishwashing routine while ensuring top-quality cleaning performance.
Top Page Image Contents