Electrolux 85050 VI Setting the water softener, Setting manually, Setting electronically

Page 11

Operating Instructions

1)The water hardness will only be indicated acoustically if the acoustic signal has been activated.

2)(°d) German degree, measure of the hardness of water

3)[mmol/l] millimol per litre, international unit for the hardness of water

4)On this setting the length of the programme may be slightly longer.

*) Factory setting

Setting the water softener

Using the table as a guide, adjust the water softener to that which cor- responds to the hardness of the water in your area:

0The dishwasher must be switched off.

Setting manually:

1.Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3. Turn the hardness range switch to 0 or 1 (see table).

4.Replace the lower basket.

Setting electronically:

5.Press the ON/OFF button.

The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated.

3

If the only LED indicator illuminated is one that belongs to a pro-

 

gramme button, this means that this programme has been activated.

The programme must be cancelled:

Press function buttons 2 and 3 simultaneously for approx. 1 second. The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated.

6.Press function buttons 2 and 3 simultaneously and keep them pressed. The LED indicators in function buttons 1 to 3 will flash.

7.Press function button 1.

The LED indicator for function button 1 will flash. The multi-display will indicate the hardness setting.

The number of the acoustic signals heard (only when the acoustic sig- nal has been activated) also corresponds to the hardness setting.

8.Pressing function button 1 increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).

9.When the hardness setting is correct, press the ON/OFF switch. The hardness setting is now saved.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Favorit 85050 Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialPanel Function button Display and control panelMulti-display can indicate Hardness range of the water in your area Prior to using for the first timeWater softener TabletsSetting electronically Setting the water softenerSetting manually Vated Special salt for the water softenerUse special salt or salt substitute Water can be softened in one of two waysAdding special salt Rinse aid can be added in one of two ways Rinse aidActivating/deactivating the inflow of rinse aid Fully open the rinse aid compartment lid Multi-display will indicate the current settingAdding rinse aid Adjusting Rinse Aid Dosing Activating/deactivating the acoustic signal For washing in the dishwasher the following cutlery/dishes Daily UseLoading Cutlery and Dishes Not be washed in the dishwasherLoading Cutlery On some models of dishwasher Or work surfaceTwo right-hand plate inserts Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large itemsBaskets can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lowerLoading Cups, Glasses Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Fill with detergent Filling with DetergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Automatic Wash Programmes Concentrated DetergentDetergent tablets Selecting the Wash Programme Programme Table Changing a programme Starting a programmeChanging/interrupting/aborting a programme Interrupting the programme by opening the dishwasher door Setting or changing the start delaySwitch off the dishwasher by pressing the ON/OFF button Setting the start delayLoad Sensing Sensor Logic Changing the start delayCancelling the start delay Changing the programme after the start delay has been setRemoving the dishes Care and CleaningSwitching off the dishwasher Stances Cleaning the FilterMalfunction Possible cause Remedy Error messages are displayedWhat to do, if ActivatedRepeated warning tones Menced programme. The programme will continueCentre Malfunction Possible cause Remedy Two short continuouslyDishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Lower basket with cutlery basket Sample loading arrangementsUpper basket Fitting the Furniture Door Panel Installing the DishwasherSee installation template supplied Following dimensionsConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveSafety valve on the threaded hose fitting for the tap Water drain Appliance is automatically pumped out Leak prevention systemWith a leak prevention system Changing a fuse Electrical ConnectionConnections Exclusions Standard guarantee conditionsEuropean Guarantee Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

85050 VI specifications

The Electrolux 85050 VI is a highly sophisticated built-in vacuum cleaner that has garnered attention in the home appliance market for its innovative design and advanced technology. This model epitomizes convenience, efficiency, and modernity, making it a valuable addition to any home.

One of the standout features of the Electrolux 85050 VI is its powerful suction capability, which ensures that dirt and debris are efficiently removed from various surfaces. With a robust motor, this vacuum cleaner can handle everything from fine dust to larger particles, ensuring a thorough clean every time. The nozzle design is optimized for performance, allowing for easy maneuverability in tight spaces and around furniture.

Additionally, the Electrolux 85050 VI is equipped with a HEPA filter, which is particularly beneficial for those with allergies or respiratory issues. This high-efficiency particulate air filter captures 99.97% of particles as small as 0.3 microns, including dust, pollen, and pet dander. This feature not only enhances indoor air quality but also reduces the frequency of filter changes, providing added convenience for users.

Another notable characteristic of the Electrolux 85050 VI is its sleek and stylish design that seamlessly integrates into modern home interiors. Its built-in nature allows for a cleaner aesthetic, eliminating the need for bulky vacuum cleaners to be stored in prominent areas. Furthermore, the unit operates quietly, ensuring minimal disruption during use.

The vacuum also comes with several attachments tailored for various cleaning tasks, including a crevice tool for narrow spaces, a dusting brush for delicate surfaces, and an upholstery nozzle for larger items like furniture. These accessories add versatility, making it suitable for different cleaning requirements around the home.

Energy efficiency is another key attribute of the Electrolux 85050 VI. Designed with eco-friendly technology, this vacuum consumes less power while still maintaining its exceptional performance. This not only helps in reducing electricity bills but also minimizes the environmental impact.

In conclusion, the Electrolux 85050 VI stands out as a premier choice for those seeking a built-in vacuum cleaner that combines advanced technology, efficiency, and elegant design. With powerful suction, a HEPA filter, versatile attachments, and energy efficiency, it meets the demands of modern households while enhancing overall comfort and cleanliness.
Top Page Image Contents