Electrolux 85050 VI manual Starting a programme, Changing/interrupting/aborting a programme

Page 29

Operating Instructions

Starting a programme

0 1. Check that the dishes and cutlery are loaded in the dishwasher in such a way that the spray arms are free to rotate.

2.Turn on the tap fully.

3.Press the ON/OFF button.

The LED indicators for all the buttons in the control panel that are now able to be selected will become illuminated.

4.Press the relevant button for the programme required (see “Programme Table”).

The programme display will become illuminated.

The remaining time for the programme will be shown in the multi-dis- play.

3

The remaining time for the programme is adjusted according to

 

amount of dishes, degree of soiling, etc.

5.Close the dishwasher door. The programme will begin.

3

If an error message is displayed in the multi-display and/or if an acous-

 

tic error message can be heard after the programme has begun, please

 

read the section “What to do if ...”.

 

Changing/interrupting/aborting a programme

3

Only change or interrupt a programme that is in progress if it is abso-

 

lutely necessary. After the appliance has been closed again, the air that

 

has entered will be heated significantly and expand. As a result, water

 

may collect in the base of the appliance and trigger the anti-flood sys-

 

tem.

 

Changing a programme

3

If you would like to change the programme before closing the dish-

 

washer door, briefly press the button for the new programme.

 

If you would like to change the programme after it has commenced,

 

proceed as follows:

1

Hot steam may escape when the dishwasher door is opened. There is a

 

risk of scalding! Be careful when opening the door of the dishwasher.

0 1. Open the door of the dishwasher. The programme will stop.

2.Press the button for the new programme and hold it down.

First, the indicator for the programme that is currently running will flash.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Favorit 85050 Dear customer Tips on using the appliancePlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Installation, Connection and Placing into Operation Safety InstructionsChild Safety General SafetyCorrect Use Economical and Ecological Dishwashing DisposalDisposing of the Packaging Material Disposal of Old AppliancesPanel Function button Display and control panelMulti-display can indicate Water softener Prior to using for the first timeTablets Hardness range of the water in your areaSetting electronically Setting the water softenerSetting manually Use special salt or salt substitute Special salt for the water softenerWater can be softened in one of two ways VatedAdding special salt Rinse aid can be added in one of two ways Rinse aidActivating/deactivating the inflow of rinse aid Fully open the rinse aid compartment lid Multi-display will indicate the current settingAdding rinse aid Adjusting Rinse Aid Dosing Activating/deactivating the acoustic signal Loading Cutlery and Dishes Daily UseNot be washed in the dishwasher For washing in the dishwasher the following cutlery/dishesLoading Cutlery On some models of dishwasher Or work surfaceFolded over to the left Loading Pans, Frying Pans Large PlatesTo ease the loading of large items Two right-hand plate insertsAcross one another Folded across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Fill with detergent Filling with DetergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Automatic Wash Programmes Concentrated DetergentDetergent tablets Selecting the Wash Programme Programme Table Changing a programme Starting a programmeChanging/interrupting/aborting a programme Switch off the dishwasher by pressing the ON/OFF button Setting or changing the start delaySetting the start delay Interrupting the programme by opening the dishwasher doorCancelling the start delay Changing the start delayChanging the programme after the start delay has been set Load Sensing Sensor LogicRemoving the dishes Care and CleaningSwitching off the dishwasher Stances Cleaning the FilterWhat to do, if Error messages are displayedActivated Malfunction Possible cause RemedyCentre Menced programme. The programme will continueMalfunction Possible cause Remedy Two short continuously Repeated warning tonesWash results are not satisfactory There are problems with the operation of the dish- washerDishes are still dirty Dishes are wet and dullThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Lower basket with cutlery basket Sample loading arrangementsUpper basket See installation template supplied Installing the DishwasherFollowing dimensions Fitting the Furniture Door PanelWater Connection Connecting the DishwasherPermitted water pressure Connect the inlet hosePlease take care when installing the water inlet hose Water inlet hose with safety valveSafety valve on the threaded hose fitting for the tap Water drain Appliance is automatically pumped out Leak prevention systemWith a leak prevention system Changing a fuse Electrical ConnectionConnections Exclusions Standard guarantee conditionsEuropean Guarantee Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

85050 VI specifications

The Electrolux 85050 VI is a highly sophisticated built-in vacuum cleaner that has garnered attention in the home appliance market for its innovative design and advanced technology. This model epitomizes convenience, efficiency, and modernity, making it a valuable addition to any home.

One of the standout features of the Electrolux 85050 VI is its powerful suction capability, which ensures that dirt and debris are efficiently removed from various surfaces. With a robust motor, this vacuum cleaner can handle everything from fine dust to larger particles, ensuring a thorough clean every time. The nozzle design is optimized for performance, allowing for easy maneuverability in tight spaces and around furniture.

Additionally, the Electrolux 85050 VI is equipped with a HEPA filter, which is particularly beneficial for those with allergies or respiratory issues. This high-efficiency particulate air filter captures 99.97% of particles as small as 0.3 microns, including dust, pollen, and pet dander. This feature not only enhances indoor air quality but also reduces the frequency of filter changes, providing added convenience for users.

Another notable characteristic of the Electrolux 85050 VI is its sleek and stylish design that seamlessly integrates into modern home interiors. Its built-in nature allows for a cleaner aesthetic, eliminating the need for bulky vacuum cleaners to be stored in prominent areas. Furthermore, the unit operates quietly, ensuring minimal disruption during use.

The vacuum also comes with several attachments tailored for various cleaning tasks, including a crevice tool for narrow spaces, a dusting brush for delicate surfaces, and an upholstery nozzle for larger items like furniture. These accessories add versatility, making it suitable for different cleaning requirements around the home.

Energy efficiency is another key attribute of the Electrolux 85050 VI. Designed with eco-friendly technology, this vacuum consumes less power while still maintaining its exceptional performance. This not only helps in reducing electricity bills but also minimizes the environmental impact.

In conclusion, the Electrolux 85050 VI stands out as a premier choice for those seeking a built-in vacuum cleaner that combines advanced technology, efficiency, and elegant design. With powerful suction, a HEPA filter, versatile attachments, and energy efficiency, it meets the demands of modern households while enhancing overall comfort and cleanliness.
Top Page Image Contents