Electrolux 85050 VI manual What to do, if, Error messages are displayed, Activated

Page 34

Operating Instructions

What to do, if ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

...Error messages are displayed.

If your appliance is equipped with an optical floor signal, in the event of an error a dot-shaped optical signal will flash on the floor.

3

Errors will only be indicated acoustically if the acoustic signal has been

 

activated.

 

 

 

If, as listed in the table below, any of the indicators in the control panel

 

or the display panel are flashing or are illuminated, and/or if an acous-

 

tic signal can be heard, you can probably rectify the fault yourself.

 

 

 

 

 

Malfunction

Possible cause

Remedy

 

 

The tap is blocked or

Clean tap.

 

 

furred with lime-scale.

 

 

 

 

 

The tap is turned off.

Turn the tap on.

 

 

The filter (where

 

 

One continuously repeated

present) in the

Clean the filter in the

 

warning tone can be heard;

threaded hose fitting at

threaded hose fitting.

 

the programme indicator for

the water inlet valve is

 

 

the selected programme is

blocked.

 

 

 

 

 

flashing: The ^indicator is

 

Press the button for the

 

continuously illuminated:

 

commenced dishwashing

 

Error code Å 10 is displayed

 

cycle;

 

in the multi-display: There is

Filters in the base of

then abort the dishwashing

 

no water running into the

the washing compart-

cycle (see chapter:

 

dishwasher.

ment are blocked.

Starting a dishwashing cycle);

 

 

 

Clean out the filters. (See

 

 

 

chapter: Cleaning the filters)

 

 

 

 

 

 

The water inlet hose has

Check hose installation.

 

 

not been correctly laid.

 

34

Image 34
Contents Favorit 85050 Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General SafetyCorrect Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old AppliancesPanel Multi-display can indicate Display and control panelFunction button Tablets Prior to using for the first timeWater softener Hardness range of the water in your areaSetting manually Setting the water softenerSetting electronically Water can be softened in one of two ways Special salt for the water softenerUse special salt or salt substitute VatedAdding special salt Activating/deactivating the inflow of rinse aid Rinse aidRinse aid can be added in one of two ways Adding rinse aid Multi-display will indicate the current settingFully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Activating/deactivating the acoustic signal Not be washed in the dishwasher Daily UseLoading Cutlery and Dishes For washing in the dishwasher the following cutlery/dishesLoading Cutlery Or work surface On some models of dishwasherTo ease the loading of large items Loading Pans, Frying Pans Large PlatesFolded over to the left Two right-hand plate insertsTwo rear plate inserts in the lower Folded across one anotherAcross one another Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketRaising the Upper Basket Filling with Detergent Fill with detergentSpecial Advice General AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentAutomatic Wash Programmes Selecting the Wash Programme Programme Table Changing/interrupting/aborting a programme Starting a programmeChanging a programme Setting the start delay Setting or changing the start delaySwitch off the dishwasher by pressing the ON/OFF button Interrupting the programme by opening the dishwasher doorChanging the programme after the start delay has been set Changing the start delayCancelling the start delay Load Sensing Sensor LogicSwitching off the dishwasher Care and CleaningRemoving the dishes Cleaning the Filter StancesActivated Error messages are displayedWhat to do, if Malfunction Possible cause RemedyMalfunction Possible cause Remedy Two short continuously Menced programme. The programme will continueCentre Repeated warning tonesDishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dullLower rinse aid dosing Technical DataThere are dried water drops on the glasses and dishes Upper basket Sample loading arrangementsLower basket with cutlery basket Following dimensions Installing the DishwasherSee installation template supplied Fitting the Furniture Door PanelPermitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseSafety valve on the threaded hose fitting for the tap Water inlet hose with safety valvePlease take care when installing the water inlet hose Water drain With a leak prevention system Leak prevention systemAppliance is automatically pumped out Electrical Connection Changing a fuseConnections European Guarantee Standard guarantee conditionsExclusions Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

85050 VI specifications

The Electrolux 85050 VI is a highly sophisticated built-in vacuum cleaner that has garnered attention in the home appliance market for its innovative design and advanced technology. This model epitomizes convenience, efficiency, and modernity, making it a valuable addition to any home.

One of the standout features of the Electrolux 85050 VI is its powerful suction capability, which ensures that dirt and debris are efficiently removed from various surfaces. With a robust motor, this vacuum cleaner can handle everything from fine dust to larger particles, ensuring a thorough clean every time. The nozzle design is optimized for performance, allowing for easy maneuverability in tight spaces and around furniture.

Additionally, the Electrolux 85050 VI is equipped with a HEPA filter, which is particularly beneficial for those with allergies or respiratory issues. This high-efficiency particulate air filter captures 99.97% of particles as small as 0.3 microns, including dust, pollen, and pet dander. This feature not only enhances indoor air quality but also reduces the frequency of filter changes, providing added convenience for users.

Another notable characteristic of the Electrolux 85050 VI is its sleek and stylish design that seamlessly integrates into modern home interiors. Its built-in nature allows for a cleaner aesthetic, eliminating the need for bulky vacuum cleaners to be stored in prominent areas. Furthermore, the unit operates quietly, ensuring minimal disruption during use.

The vacuum also comes with several attachments tailored for various cleaning tasks, including a crevice tool for narrow spaces, a dusting brush for delicate surfaces, and an upholstery nozzle for larger items like furniture. These accessories add versatility, making it suitable for different cleaning requirements around the home.

Energy efficiency is another key attribute of the Electrolux 85050 VI. Designed with eco-friendly technology, this vacuum consumes less power while still maintaining its exceptional performance. This not only helps in reducing electricity bills but also minimizes the environmental impact.

In conclusion, the Electrolux 85050 VI stands out as a premier choice for those seeking a built-in vacuum cleaner that combines advanced technology, efficiency, and elegant design. With powerful suction, a HEPA filter, versatile attachments, and energy efficiency, it meets the demands of modern households while enhancing overall comfort and cleanliness.