Electrolux 85050 VI manual Connecting the Dishwasher, Water Connection, Permitted water pressure

Page 40

Installation and Connection Instructions

Connecting the Dishwasher

Water Connection

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

•The dishwasher must be connected to a cold water supply.

•The dishwasher must not be connected to open hot water appliances or instantaneous water heaters.

Permitted water pressure

Lowest permitted water pressure:

Consult your installer if the water pres-

1 bar (=10 N/cm2 =100 kPa)

sure is less than 1 bar.

Highest permitted water pressure:

In the case of a water pressure greater

10 bar (=100 N/cm2 =1 MPa)

than 10 bar, a pressure reduction valve

 

must be used (available from your

 

dealer).

 

 

 

Connect the inlet hose

1

The water inlet hose must not be

 

kinked, crushed or entangled when it is being connected up.

0Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet hose to a tap with an external thread (¾ inch). The inlet hose is equipped either with a plastic or with a metal connection nut:

–Tighten plastic hose connection nuts by hand only.

–Metal hose connection nuts must be tightened using an appropriate tool. Finally, visually check that it is water-tight (ensure that the tap is not dripping).

3

• In order that access to the tap in the kitchen is not limited by the use

 

of the dishwasher, we recommend the installation of an additional

tap, or fitting a two way adapter to the existing tap.

• If you need a longer water inlet hose than that supplied, VDE approved complete hose sets are to be used. These are available from your local Service Force Centre.

• Do not use, for connection, old hoses which have been used for another appliance.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Favorit 85050 Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesPanel Multi-display can indicate Display and control panelFunction button Prior to using for the first time Water softenerTablets Hardness range of the water in your areaSetting manually Setting the water softenerSetting electronically Special salt for the water softener Use special salt or salt substituteWater can be softened in one of two ways VatedAdding special salt Activating/deactivating the inflow of rinse aid Rinse aidRinse aid can be added in one of two ways Adding rinse aid Multi-display will indicate the current settingFully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Activating/deactivating the acoustic signal Daily Use Loading Cutlery and DishesNot be washed in the dishwasher For washing in the dishwasher the following cutlery/dishesLoading Cutlery Or work surface On some models of dishwasherLoading Pans, Frying Pans Large Plates Folded over to the leftTo ease the loading of large items Two right-hand plate insertsFolded across one another Across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketRaising the Upper Basket Filling with Detergent Fill with detergentSpecial Advice General AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentAutomatic Wash Programmes Selecting the Wash Programme Programme Table Changing/interrupting/aborting a programme Starting a programmeChanging a programme Setting or changing the start delay Switch off the dishwasher by pressing the ON/OFF buttonSetting the start delay Interrupting the programme by opening the dishwasher doorChanging the start delay Cancelling the start delayChanging the programme after the start delay has been set Load Sensing Sensor LogicSwitching off the dishwasher Care and CleaningRemoving the dishes Cleaning the Filter StancesError messages are displayed What to do, ifActivated Malfunction Possible cause RemedyMenced programme. The programme will continue CentreMalfunction Possible cause Remedy Two short continuously Repeated warning tonesThere are problems with the operation of the dish- washer Wash results are not satisfactoryDishes are still dirty Dishes are wet and dullLower rinse aid dosing Technical DataThere are dried water drops on the glasses and dishes Upper basket Sample loading arrangementsLower basket with cutlery basket Installing the Dishwasher See installation template suppliedFollowing dimensions Fitting the Furniture Door PanelConnecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseSafety valve on the threaded hose fitting for the tap Water inlet hose with safety valvePlease take care when installing the water inlet hose Water drain With a leak prevention system Leak prevention systemAppliance is automatically pumped out Electrical Connection Changing a fuseConnections European Guarantee Standard guarantee conditionsExclusions Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

85050 VI specifications

The Electrolux 85050 VI is a highly sophisticated built-in vacuum cleaner that has garnered attention in the home appliance market for its innovative design and advanced technology. This model epitomizes convenience, efficiency, and modernity, making it a valuable addition to any home.

One of the standout features of the Electrolux 85050 VI is its powerful suction capability, which ensures that dirt and debris are efficiently removed from various surfaces. With a robust motor, this vacuum cleaner can handle everything from fine dust to larger particles, ensuring a thorough clean every time. The nozzle design is optimized for performance, allowing for easy maneuverability in tight spaces and around furniture.

Additionally, the Electrolux 85050 VI is equipped with a HEPA filter, which is particularly beneficial for those with allergies or respiratory issues. This high-efficiency particulate air filter captures 99.97% of particles as small as 0.3 microns, including dust, pollen, and pet dander. This feature not only enhances indoor air quality but also reduces the frequency of filter changes, providing added convenience for users.

Another notable characteristic of the Electrolux 85050 VI is its sleek and stylish design that seamlessly integrates into modern home interiors. Its built-in nature allows for a cleaner aesthetic, eliminating the need for bulky vacuum cleaners to be stored in prominent areas. Furthermore, the unit operates quietly, ensuring minimal disruption during use.

The vacuum also comes with several attachments tailored for various cleaning tasks, including a crevice tool for narrow spaces, a dusting brush for delicate surfaces, and an upholstery nozzle for larger items like furniture. These accessories add versatility, making it suitable for different cleaning requirements around the home.

Energy efficiency is another key attribute of the Electrolux 85050 VI. Designed with eco-friendly technology, this vacuum consumes less power while still maintaining its exceptional performance. This not only helps in reducing electricity bills but also minimizes the environmental impact.

In conclusion, the Electrolux 85050 VI stands out as a premier choice for those seeking a built-in vacuum cleaner that combines advanced technology, efficiency, and elegant design. With powerful suction, a HEPA filter, versatile attachments, and energy efficiency, it meets the demands of modern households while enhancing overall comfort and cleanliness.
Top Page Image Contents