Electrolux SANTO 4085-8 KG manual Temperature setting buttons, Temperature Displays

Page 20

Appliance Description

Temperature setting buttons

The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons.

These buttons are connected to the temperature display.

•The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the dis- play of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).

•Each time one of the two buttons is pressed again the DESIRED tem- perature is adjusted by 1 °C.

•If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature.

DESIRED temperature means:

The temperature that has been selected for inside the fridge or the freezer compartment. The DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the fridge or the freezer compartment. The ACTUAL temperature is indi- cated with static illuminated numbers.

Temperature Displays

The temperature displays shows several types of information.

•During normal operation, the temperature currently present in the fridge or the freezer compartment (ACTUAL temperature) is displayed.

•When the temperature is being adjusted a flashing display indicates the fridge or the freezer compartment temperature currently set (DESIRED temperature).

•If there is a fault in the appliance the temperature display shows:

–a rectangle in the upper part of the temperature display for a fault in the fridge,

–a rectangle in the lower part of the temperature display for a fault in the freezer.

20

818 18 12-01/0

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Santo 4085-8 KG Dear customer Contents Service & Spare Parts Important Safety Instructions Prior to InstallationInstallation RefrigerantChild Safety Maintenance and CleaningDuring Use ServicingOld Appliances Environmental InformationPackaging Appliance Transport Before UseRemove the transport fittings from the storage shelves Fitting the Door Handles InstallationInstallation Location Refrigerator/freezer needs air Appliance AlignmentElectrical Connection Reversing The Door Cover on the plinth from the left to the rightUnscrew the centre door bearing 818 18 12-01/0 Reversing The Door Appliance Description View of ApplianceFreezer tray with Cold Accumulation Block Control Panel Temperature setting buttons Temperature DisplaysPrior to Initial Start-Up Freezer Compartment Start-Up Initial Start-UpRefrigerator Start-Up Temperature Adjustment COOLMATIC/FROSTMATIC Switching the Appliance Off If the appliance is not to be used for an extended periodHoliday Mode Temperature Warning Control and Information SystemsOpen Door-Warning For the fridgeFor the freezer Function ErrorsOpening the Freezer Compartment Door Interior Accessories Storage ShelvesBottle rack Important Only store unopened bottles horizontallyVariable Inner Door Drawers and CompartmentsBottle Holder Vario drawer-setCorrect storage Freezing Tips Frozen StoragePreparation of Ice Cubes Freezer Compartment Defrosting DefrostingRefrigerator is defrosted automatically Pull out the water drain spout Energy Saving Advice Hints and TipsNormal Operating Sounds Food StorageMaintenance and Cleaning Internal CleaningExternal Cleaning Replace light bulbSymptom Solution Something not WorkingEvaporator Technical TerminologyRefrigerant Circuit Guarantee Conditions Regulations, Standards, GuidelinesCompressor CondenserEuropean Guarantee Service & Spare Parts Service & Spare PartsHelp us to help you Customer Care
Top Page Image Contents