Electrolux SANTO 4085-8 KG Regulations, Standards, Guidelines, Guarantee Conditions, Compressor

Page 41

•Compressor

The compressor looks like a small drum. It is driven by a built-in electric motor and is mounted on the base of the appliance at the rear. The task of the compressor is to draw in vaporised refrigerant from the evaporator, to compress it, and to pass it on to the condenser.

•Condenser

The condenser normally has the form of a grid. The refrigerant compressed in the compressor is liquefied in the condenser. During this process, heat is released to the surrounding air at the surface of the condenser. The condenser is mounted on the base of the appliance.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary measures in accordance with appliance safety legislation regulations (GSG), accident prevention regulations for refrigeration appliances (VBG 20) and the regulations of the German Society of Electrical Engineers (VDE) were observed in the manufacture of this appliance.

The refrigerant circuit has been checked for leaks.

;This appliance is in accordance with the following EU guidelines:

–73/23/EWG dated 19 February 1973 - low voltage guidelines.

–89/336/EWG dated 3 May 1989

(including guideline change notice 92/31/EWG) - EMV guideline

Guarantee Conditions

AEG offer the following guarantee to the first purchaser of this appliance.

1.The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation.

The guarantee does not cover commercial use.

818 18 12-01/0

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Santo 4085-8 KG Dear customer Contents Service & Spare Parts Prior to Installation Important Safety InstructionsInstallation RefrigerantMaintenance and Cleaning Child SafetyDuring Use ServicingOld Appliances Environmental InformationPackaging Before Use Appliance TransportRemove the transport fittings from the storage shelves Fitting the Door Handles InstallationInstallation Location Appliance Alignment Refrigerator/freezer needs airElectrical Connection Cover on the plinth from the left to the right Reversing The DoorUnscrew the centre door bearing 818 18 12-01/0 Reversing The Door View of Appliance Appliance DescriptionFreezer tray with Cold Accumulation Block Control Panel Temperature Displays Temperature setting buttonsPrior to Initial Start-Up Freezer Compartment Start-Up Initial Start-UpRefrigerator Start-Up Temperature Adjustment COOLMATIC/FROSTMATIC If the appliance is not to be used for an extended period Switching the Appliance OffHoliday Mode Control and Information Systems Temperature WarningOpen Door-Warning For the fridgeFor the freezer Function ErrorsOpening the Freezer Compartment Door Storage Shelves Interior AccessoriesBottle rack Important Only store unopened bottles horizontallyDrawers and Compartments Variable Inner DoorBottle Holder Vario drawer-setCorrect storage Freezing Tips Frozen StoragePreparation of Ice Cubes Freezer Compartment Defrosting DefrostingRefrigerator is defrosted automatically Pull out the water drain spout Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningReplace light bulb External CleaningSomething not Working Symptom SolutionEvaporator Technical TerminologyRefrigerant Circuit Regulations, Standards, Guidelines Guarantee ConditionsCompressor CondenserEuropean Guarantee Service & Spare Parts Service & Spare PartsHelp us to help you Customer Care
Top Page Image Contents