Prior to Initial Start-Up
1 Before connecting the appliance to the mains and putting it into ope-
ration for the first time, leave the appliance to stand for 2 hours. This is necessary to allow the oil to flow back into the compressor. Otherwise the compressor may be damaged.
01. Please clean the appliance interior and all accessories prior to initial
2.Remove the cold accumulation block from the freezer tray.
3.Place the cold accumulation block into a compartment or drawer only after the optimal storage temperature of
4.After 24 hours place the cold accumulation block in the freezer tray or in the front of the upper drawer.
5.
818 18 | 21 |