Electrolux SANTO 4085-8 KG Important Safety Instructions, Prior to Installation, Refrigerant

Page 5

1 Important Safety Instructions

These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department.

Prior to Installation

Check the refrigerator/freezer for transport damage. Under no circumstances should a damaged appliance be installed! In the event of damage, please contact your retailer.

Installation

This appliance is heavy. Care should be taken when moving it.

It is dangerous to alter the specifications or attempt to modify this product in any way.

Ensure that the appliance does not stand on the electrical supply cable. If the supply cable is damaged, it must be replaced by a cable available from your local Service Force Centre.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Parts which heat up should not be exposed. Whenever possible, the back of the appliance should be close to a wall, but leaving the required distance for ventilation, as stated in the installation instructions.

The appliance should be left for 2 hours after installation before it is turned on, in order to allow the refrigerant to settle.

Refrigerant

The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.

During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged.

If the refrigerant circuit should become damaged:

avoid open flames and sources of ignition;

thoroughly ventilate the room in which the appliance is situated.

818 18 12-01/0

5

Image 5
Contents Santo 4085-8 KG Dear customer Contents Service & Spare Parts Prior to Installation Important Safety InstructionsInstallation RefrigerantMaintenance and Cleaning Child SafetyDuring Use ServicingOld Appliances Environmental InformationPackaging Before Use Appliance TransportRemove the transport fittings from the storage shelves Fitting the Door Handles InstallationInstallation Location Appliance Alignment Refrigerator/freezer needs airElectrical Connection Cover on the plinth from the left to the right Reversing The DoorUnscrew the centre door bearing 818 18 12-01/0 Reversing The Door View of Appliance Appliance DescriptionFreezer tray with Cold Accumulation Block Control Panel Temperature Displays Temperature setting buttonsPrior to Initial Start-Up Freezer Compartment Start-Up Initial Start-UpRefrigerator Start-Up Temperature Adjustment COOLMATIC/FROSTMATIC If the appliance is not to be used for an extended period Switching the Appliance OffHoliday Mode Control and Information Systems Temperature WarningOpen Door-Warning For the fridgeFor the freezer Function ErrorsOpening the Freezer Compartment Door Storage Shelves Interior AccessoriesBottle rack Important Only store unopened bottles horizontallyDrawers and Compartments Variable Inner DoorBottle Holder Vario drawer-setCorrect storage Freezing Tips Frozen StoragePreparation of Ice Cubes Freezer Compartment Defrosting DefrostingRefrigerator is defrosted automatically Pull out the water drain spout Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningReplace light bulb External CleaningSomething not Working Symptom SolutionEvaporator Technical TerminologyRefrigerant Circuit Regulations, Standards, Guidelines Guarantee ConditionsCompressor CondenserEuropean Guarantee Service & Spare Parts Service & Spare PartsHelp us to help you Customer Care