Installation
Your Refrigerator Needs Air
For correct operation this
appliance must be located in a dry atmosphere, away from
heatsources, e.g. cookers, radiators, boilers and direct
sunlight.
You should also ensure that air
can circulate freely around the back and the top of the
cabinet. There should be
100mm (4”) between the top of the cabinet and any
overhanging kitchen furniture.
Alternatively allow 50mm (2”) between the top of the cabinet and any overhanging kitchen furniture and a gap of 25mm (1”) on either side of the appliance.
If your refrigerator is installed
under a continuous worktop, an air outlet opening of at least 200 cm2 and a ventilation grille (A/B) matching the worktop design should be installed at
the rear of the worktop. The cut surfaces of the worktop (C) should be varnished to avoid swelling due to penetration of moisture. The appliance wall distance must beat least 30 mm
and should be checked before
the ventilation grille is inserted.
Detaching the Worktop
After the worktop has been removed the appliance can be
installed underneath a continuous worktop. The procedure is as follows:
1.Unscrew the screws (1) on the right and the left.
2. Lift the worktop slightly, push it about 20 mm towards the rear, and lift it off upwards (2). Unscrew the holding bracket (3) and keep it in a safe place (4).
9