Installation
Relocate the door holder pin in the door holder as per the figure.
Place the door holder pin in the door at the bottom on the left side, and fix the door holder with the screw.
Drive in the two adjustable front legs, and raise the appliance in the upright position.
Relocate the door handle from the left side to the right, and blind the
To reverse the handle proceed as follows:
Remove screw covers (if fitted) and handle retaining screws. Remove blanking plugs on the opposite side using a punch.
Relocate the handle to the opposite side and refit retaining screws (covers if fitted), and push the plastic plugs supplied with the appliance into the holes where the handle was previously fitted.
11