Electrolux S 64140 TK Disposal, Remove Transport Packaging, Appliance Packaging Information

Page 7

Disposal

Appliance Packaging Information

All materials are environmentally sound! They can be disposed of or burned at an incinerating plant without danger.

About the materials: The plastics can be recycled and are identified as follows:

>PE< for polyethylene, e.g. the outer covering and the bags in the interior.

>PS< for polystyrene foam, e.g. the pads, which are all free of chloro- fluorocarbon. The carton parts are made from recycled paper and should be disposed of at a wastepaper recycling collection location.

Disposal of Old Appliances

For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of its service life - for your new appliance as well.

Warning! Before disposing of old appliances make them inoperable. Remove plug from mains, sever the power cable, remove or destroy any snap or latch closures. This ensures that children do not lock themselves inside the appliance (danger of suffocation!) or place themselves into other life- endangering situations.

Disposal:

The appliance may not be disposed of with domestic waste or bulky refuse.

The refrigerant circuit, especially the heat exchanger at the back of the appliance, must not be damaged.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Remove Transport Packaging

The appliance and the interior fittings are protected for transport.

1. Pull off the adhesive tape on the left and right side of the door.

2.Remove all adhesive tape and packing pieces from the interior of the appliance.

7

Image 7
Contents Santo Dear customer Contents Contents Prior to initial start-up Important Safety InstructionsSafety of children Intended useCase of malfunction Daily OperationDisposal of Old Appliances DisposalRemove Transport Packaging Appliance Packaging InformationInstallation Location InstallationClimate classification For an ambient temperature Should be checked before Ventilation grille is inserted InstallationYour Refrigerator Needs Air Detaching the WorktopLevelling Reversing the DoorInstallation Changing Over the Freezer Compartment Door Plug Socket Is no longer accessible afterThat indicated on the appliance rating Plate Electrical ConnectionView of the Appliance Description of the ApplianceThermostat Control Using the ApplianceBefore Use To Start the ApplianceInbetriebnahme und Temperaturregelung Switching Off the ApplianceInterior Accessories Storage ShelvesCorrect Storage Variable Inner DoorFreezing and Storing Frozen Food Defrosting Preparation of Ice CubesFridge Defrosts Automatically Page Cleaning and Care Energy Saving Tips Correcting Malfunctions What to do ifWhat to do if Regulations, Standards, Guidelines Noises During OperationChanging the Light Bulb Compressor Technical TerminologyRefrigerant Circuit EvaporatorCustomer Care Department Service and Spare Parts0870 5 Guarantee Conditions AE/2-1 Page From the Electrolux Group. The world’s No.1 choice AEG Hausgeräte GmbH Postfach 90327 Nürnberg Electrolux plc