Electrolux AOS061E Setting the Cooking Time, Important do not set the cooking time on Timer TM

Page 23

USA

5938 036 01

After 5 seconds the COOKING TEMPERATURE stops flashing to indicate that it has been SET.

Note 1

The temperature of the steam cycle is automatically set at 212°F(100°C). You can, however, set low temperature steam from 77°F to 210°F(25° to 99°C) by turning the knob.

Note 2

With the COMBI cycle it is possible to do a dough proving cycle by setting a temperature below 122°F(77 to 121°F), 50°C(25 to 49°C).

When the dough proving cycle is set as a first stage compartment preheatingis excluded.

4.3.3 SETTING THE COOKING TIME

Press the following illuminated button (button lights up) to set cooking time:

TM

The relative DISPLAY will show the TOTAL REMAINING TIME of the cooking cycle (large numbers) and the TIME TO BE SET (small numbers - flash for 5 seconds).

E.g. : 1 h 30'

TOTAL REMAINING TIME

E.g..: 1 h 30'

CURRENT REMAINING TIME

time LED on

Turn the knob clockwise (to increase the value) or counter clockwise (to decrease the value) to set the desired cooking TIME on the small

DISPLAY.

After 5 seconds the COOKING TIME display stops flashing to indicate that it has been SET.

Note:

In this case there is only one cooking cycle or phase so CURRENT remaining time and TOTAL remaining time will coincide.

4.3.4SETTING AND USING THE PROBE (TO MONITOR PRODUCT CORE TEMPERATURE)

This temperature probe allows high precision control of the temperature reached at the core of the product being cooked so that the desired value can be set and the cooking cycle stopped automatically when the product core reaches the set temperature.

Im portant: The temperature probe is a precision instrument and must be handled with care. Avoid knocks, do not apply excessive force when inserting the probe, an do not pull on the lead (take care particularly when using roll-in racks). The guarantee does not cover damage to the core temperature probe caused by improper use.

1) Switch on the oven.

Remove the product core temperature probe "C" from its seat "D" and insert it into the product without forcing it and making sure that the tip (sensitive element) is located in the proximity of the centre of the product.

LEVEL C

LEVEL A

probe with 1 sensor

MULTIPOINT probe with 6 sensors

The LEVEL A oven is equipped with a MULTIPOINT probe with 6 sensors located at intervals along the wand, enabling the correct temperature to be read in the centre of the product even if the probe tip is not positioned at the product core.

Close the oven door.

2)Select the desired cooking cycle and set the cooking temperature on thermostat TS.

Important: do not set the cooking time on Timer TM.

3)Set the TEMPERATURE of the CORE PROBE by pressing the following illuminated button twice (button lights up):

PRB

The relative DISPLAY will show the PROBE TEMPERATURE (large numbers) and the TEMPERATURE TO SET (small numbers - flash for 5 seconds).

E.g.: 135°F

CURRENT PROBE

TEMPERATURE

E.g.: 176°F

REQUIRED

PROBE

TEMPERATURE

temperature probe LED on

Turn the knob clockwise (to increase the value) or counter clockwise (to decrease the value) to set the DESIRED PROBE TEMPERATURE on the small DISPLAY.

After 5 seconds the DESIRED PROBE TEMPERATURE stops flashing to indicate that it has been SET.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents DOC. no 036 Esquema Para LA Instalación Nivel Funcional Mod GN 1/1Niveau Fonctionnel Mod GN 2/1 5938 1208 mm 364 mm 335 200 5938 036 5938 Appliance Identification Instructions for Installation and USEDescription of Appliance Main FeaturesGN 1/1 GN 2/1 10 GN 1/1 10 GN 2/1 20 GN 1/1 20 GN 2/1 Technical DataKeep the appliance area free and clear from combustibles PrecautionsDisposal Safeguarding the EnvironmentCleaning USECombusted GAS Discharge Place of InstallationPositioning Always install Installation of AccessoriesWater Supply Connections Installing the Power Supply CableElectrical Connection Water Mains ConnectionWaring Blocking the Drain is Hazardous GAS ConnectionNominal Heat Output Checking the Supply Pressure aServicing Safety DevicesTroubleshooting Operation Check20-GRID Models Opening the Oven DoorClosing the Oven Door 6- and 10-GRID ModelsMain Cooking Modes Description of the Control PanelIntroduction Main ControlsLED off boiler ready Additional FunctionsBoiler status LED Introduction Switching the Oven onManual Controls Setting the Cooking Cycle Operating LevelImportant do not set the cooking time on Timer TM Setting the Cooking TimeOven Chamber Humidity Cooking Setting Cooking HumidityStart the cycle. Press the Cooking Start/Stop button Utility Cooking with TWO Phases in Automatic SequenceDelta Cooking UtilitiesAutomatic Controls Return to menu Select the phasesPhase 1 flashing Selected item Phase 2 flashing Selected itemStoring Recipes or Programs Setting the TIME, Date and Delay StartProgram Selected Editing the SET ParametersRecipe or Program Search Using Preset ProgramsSelected option Information and Error CodesPassword Deleting a Recipe or Program from the MemoryDetergent Switching OFF in the Event of a FaultCare and Maintenance Rinse AIDDescaler Cleaning Method Periodical Maintenance of the BoilerReplacing Consumable Components Special Cleaning Instructions

AOS061E specifications

The Electrolux AOS061E is a versatile and efficient air conditioning unit designed to enhance indoor comfort while maximizing energy savings. This model is particularly appealing for individuals and families seeking a reliable cooling solution that seamlessly integrates into their living environment.

One of the standout features of the AOS061E is its energy efficiency. The unit operates with a high Energy Efficiency Ratio (EER), indicating that it effectively transforms electrical energy into cooling power. This not only helps in reducing electricity bills but also highlights its commitment to eco-friendliness, making it a commendable choice for environmentally conscious consumers.

The AOS061E incorporates advanced inverter technology, which allows for precise temperature control and quieter operation. The inverter system adjusts the compressor's speed according to the cooling demand, ensuring that the space is maintained at the desired temperature without unnecessary power consumption. This results in a more stable and comfortable climate, particularly during extreme weather conditions.

Another key characteristic of the Electrolux AOS061E is its user-friendly interface. Equipped with an intuitive remote control, users can easily adjust settings from anywhere in the room. The unit also includes a digital display that provides real-time information about the temperature and chosen modes. Additionally, several cooling modes, such as turbo and sleep mode, are available to cater to different preferences and needs.

The AOS061E features a sleek and modern design, ensuring it complements various interior styles. Its compact size allows for easy installation in a myriad of settings, whether in small apartments, offices, or larger living spaces. The unit is also equipped with a washable air filter, promoting better air quality by capturing dust and allergens, which is vital for households with allergy sufferers.

In terms of noise levels, the AOS061E operates quietly, making it suitable for use in bedrooms, study areas, or any other location where sound might be a concern. The low decibel output allows for uninterrupted sleep and concentration.

Overall, the Electrolux AOS061E is a feature-packed air conditioning unit that prioritizes efficiency, comfort, and convenience. Its blend of advanced technology, user-friendly controls, and sleek design make it an excellent choice for anyone looking to improve their indoor climate while being mindful of energy consumption. With the AOS061E, achieving optimal comfort at home is not only possible but also effortless.
Top Page Image Contents