Electrolux 40660 i manual Installation and Connection Instructions, Installing the Dishwasher

Page 32

Installation and Connection Instructions

INSTALLATION AND CONNECTION INSTRUCTIONS

Installing the Dishwasher

•The dishwasher must be installed on a firm floor and adjusted such that it is stable and level.

• To compensate for unevenness in the floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrew- ing:

– use a screwdriver.

•For built-in, integrated and fully integrated dishwashers, the rear feet should be adjusted from the front of the appliance using a screwdriver.

•The drain hose, inlet hose and mains cable must be laid such that they are free to move in the rear of the plinth recess, so that they cannot be kinked or crushed.

•The dishwasher must also be screwed on tightly to the work surface or to the adjoining units. This is absolutely necessary so that its sta- bility is guaranteed according to VDE regulations.

32

Image 32

Contents Favorit 40660 Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Control panel NingPrior to using for the first time Adjusting the Water SoftenerArea where you live PanelBe cancelled by pressing the appropriate button Dishwasher must be switched offManual setting Electronic settingFilling with Salt for the Water Softener Fill with dishwasher saltRemain illuminated Open the door, remove the lower Basket Turning it anticlockwiseFilling with Rinse Aid Ough rinsing, spot and streak free dryingAge the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Daily UseLoading Cutlery and Dishes Not be washed in the dishwasherLoading Cutlery Upright position are a potentialHazard RackLoading Pans, Frying Pans Large Plates Folded over to the leftTo ease the loading of large items Two right-hand plate insertsFolded across one another Across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Filling with Detergent Fill with detergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Concentrated Detergent Detergent tabletsSelecting the Wash Programme Programme Table Type of SoilingStart the wash programme Interrupting or ending the wash programmeWasher Open the door carefullySetting or changing the delay start timer Setting the delay start timerChanging the delay start timer Pause functionCare and Cleaning Switching Off the DishwasherSive cleaners Emptying the DishwasherCleaning the Filter StancesFault warnings are displayed What to do, ifThere are problems operating the dishwasher Wash results are unsatisfactoryDishes are still dirty Dishes are wet and dullThere are dried water drops on the glasses and dishes Technical DataDecrease rinse aid dosing Sample loading arrangements Upper basket Lower basket with cutlery basketInstallation and Connection Instructions Installing the DishwasherDishwashers That Can Be Integrated See installation template suppliedWith the following dimensions Connecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater inlet hose with safety valve Please take care when installing the water inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page Page Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG