Electrolux 40660 i Start the wash programme, Interrupting or ending the wash programme, Washer

Page 24

Operating Instructions

Start the wash programme

0 1. Check that when the dishes and cutlery are loaded in the dishwasher the spray arms are free to rotate.

2.Open the water tap fully.

3.Shut the door.

4.Press the ON/OFF button. ON/OFF button indicator comes on.

5.Press the button for the programme required (see “Programme Table“). The programme indicator lights up. One or two lights will flash in the multi-display. During this time it is possible to reselect the programme. The selected washing programme begins after approx. 6 seconds. The current wash programme stage will always be shown in the multi-dis- play.

3	If the top light and/or the middle light in the multi-display flash after
	the programme has started please read the section “What to do, if...“.
	Interrupting or ending the wash programme
3	Only interrupt a wash programme in progress if it is absolutely neces-
	sary. After the appliance door has been closed again the air that has
	entered will be quickly heated and expand. As a result water may pene-
	trate the base of the appliance and trigger the anti-flood system.
	Interrupting the wash programme by opening the door of the dish-
	washer
1	Hot steam can escape from the appliance when the door is opened.
	Open the door carefully.

0 1. Open the door of the dishwasher. The wash programme will stop.

2.Lights are flashing in the multi-display.

3.Shut the door. The wash programme will continue.

Ending the wash programme

0 1. Press the button for the wash programme that is running and hold it down until the programme indicator for the wash programme goes out.

2.Release the programme button; the wash programme has been ended.

24

Image 24

Contents Favorit 40660 Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Control panel NingPrior to using for the first time Adjusting the Water SoftenerArea where you live PanelBe cancelled by pressing the appropriate button Dishwasher must be switched offManual setting Electronic settingFilling with Salt for the Water Softener Fill with dishwasher saltRemain illuminated Open the door, remove the lower Basket Turning it anticlockwiseFilling with Rinse Aid Ough rinsing, spot and streak free dryingAge the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Daily UseLoading Cutlery and Dishes Not be washed in the dishwasherLoading Cutlery Upright position are a potentialHazard RackLoading Pans, Frying Pans Large Plates Folded over to the leftTo ease the loading of large items Two right-hand plate insertsFolded across one another Across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Filling with Detergent Fill with detergentGeneral Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Concentrated Detergent Detergent tabletsSelecting the Wash Programme Programme Table Type of SoilingStart the wash programme Interrupting or ending the wash programmeWasher Open the door carefullySetting or changing the delay start timer Setting the delay start timerChanging the delay start timer Pause functionCare and Cleaning Switching Off the DishwasherSive cleaners Emptying the DishwasherCleaning the Filter StancesFault warnings are displayed What to do, ifThere are problems operating the dishwasher Wash results are unsatisfactoryDishes are still dirty Dishes are wet and dullTechnical Data Decrease rinse aid dosingThere are dried water drops on the glasses and dishes Sample loading arrangements Upper basket Lower basket with cutlery basketInstallation and Connection Instructions Installing the DishwasherSee installation template supplied With the following dimensionsDishwashers That Can Be Integrated Connecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater inlet hose with safety valve Please take care when installing the water inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page Page 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG