Electrolux 40660 i manual Water inlet hose with safety valve

Page 35

	Installation and Connection Instructions
3	The following section is only applicable to dishwashers that have a
	safety valve on the threaded hose fitting for the tap:
	Water inlet hose with safety valve
	After connecting the double-walled water inlet hose, the safety valve is
	next to the tap. Therefore the water inlet hose is only under pressure
	while the water is running. If the water inlet hose starts to leak during
	this operation, the safety valve cuts off the running water and the
	draining pump in the dishwasher is switched on.
1	Please take care when installing the water inlet hose:
	– The distance between the bottom
	edge of the safety value and the
	floor on which the dishwasher is
	standing must be at least 30 cm:
	– The electrical cable for the safety
	valve is in the double-walled water
	inlet hose. Do not immerse the
	water inlet hose or the safety valve
	in water.
	– If the water inlet hose or the safety
	valve is damaged, remove the
	mains plug immediately.
	– A water inlet hose with safety valve
	must only be replaced by your local
	Service Force Centre.
	– Place the water inlet hose in such a way that it is never higher than
	the bottom edge of the safety valve.

35

Image 35

Contents Favorit 40660 Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Ning Control panelPanel Prior to using for the first timeAdjusting the Water Softener Area where you liveElectronic setting Be cancelled by pressing the appropriate buttonDishwasher must be switched off Manual settingTurning it anticlockwise Filling with Salt for the Water SoftenerFill with dishwasher salt Remain illuminated Open the door, remove the lower BasketFill with rinse aid Filling with Rinse AidOugh rinsing, spot and streak free drying Age the applianceDaily Use Adjusting Rinse Aid DosingNot be washed in the dishwasher Loading Cutlery and DishesRack Loading CutleryUpright position are a potential HazardTwo right-hand plate inserts Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large itemsBaskets can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lowerLoading Cups, Glasses Coffee Services Fill with detergent Filling with DetergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Detergent tablets Concentrated DetergentType of Soiling Selecting the Wash Programme Programme TableOpen the door carefully Start the wash programmeInterrupting or ending the wash programme WasherPause function Setting or changing the delay start timerSetting the delay start timer Changing the delay start timerEmptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Sive cleanersStances Cleaning the FilterWhat to do, if Fault warnings are displayedDishes are wet and dull There are problems operating the dishwasherWash results are unsatisfactory Dishes are still dirtyThere are dried water drops on the glasses and dishes Technical DataDecrease rinse aid dosing Upper basket Lower basket with cutlery basket Sample loading arrangementsInstalling the Dishwasher Installation and Connection InstructionsDishwashers That Can Be Integrated See installation template suppliedWith the following dimensions Connect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Page Page Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG