Electrolux 5070 manual Start the Wash Programme, Changing/Interrupting/Cancelling

Page 22

Operating instructions

Start the Wash Programme

0 1. Check that when the dishes and cutlery are loaded into the dishwasher the spray arms are free to rotate.

2.Open the tap fully.

3.Shut the door.

4.Press the ON/OFF button. The ON/OFF button indicator illuminates.

5.Press the programme button for the desired programme (see "Pro- gramme Table"). The programme indicator illuminates. The selected programme begins after around 6 seconds. During the wash pro- gramme the current programme step is indicated on the programme progress display.

3

If END or DRYING on the programme progress display flash after the

 

start of the programme, please read the "What to do, if..." section.

 

Changing/Interrupting/Cancelling

 

the Wash Programme

3

Only change or interrupt a wash programme in progress if it is abso-

 

lutely necessary to do so.

 

Changing the wash programme

3

If you want to change the wash programme within 6 seconds of mak-

 

ing a programme selection, briefly press the button for the new wash

 

program.

 

If you want to change the wash programme at a later point in time, use

 

the following procedure:

0 1. Press the button for the new wash programme and hold it pressed. The indicators for both programmes now flash.

2.After a few seconds only the indicator for the new programme flashes. Release the programme button, the new programme is now running.

Interrupting the wash programme by opening the door of the dishwasher

1Hot steam may escape from the appliance when opening the door. Open the door carefully.

0 1. Open the door of the dishwasher. The wash programme stops.

2.The indicator for the programme that is currently running extinguishes.

3.Close the door. The wash programme continues.

22

Image 22
Contents Ökofavorit Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General safetyCorrect Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old AppliancesAppliance Features and Control Panel Prior to using for the first time Control PanelSalt Adjust the Water SoftenerAdjust Number Hardness range of the water in your areaUse dishwasher salt Filling with Salt for the Water SoftenerFill with dishwasher salt Open the door, remove the lower rackAge the appliance Filling with Rinse AidOugh rinsing, spot and streak free drying Fill with rinse aidDaily Use Adjusting Rinse Aid DosingReplace the lid and tighten by turn- ing clockwise Loading Cutlery and Dishes Loading Cutlery Load large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans and Large PlatesTo ease the loading of large items at Loading Cups, Glasses Coffee Services Raising the Upper Rack Adjusting the Height of the Upper RackLowering the Upper Rack Maximum Height of the DishesFill with Detergent Filling with DetergentUse only dishwasher detergent Tions given on the detergent packagingBio Wash Programmes and Concentrated Detergents Detergent RecommendationsSelecting the Wash Programme Programme Table Wash Programme Changing/Interrupting/CancellingStart the Wash Programme Changing the wash programmeLoad Sensing Sensor Logic Switching Off the DishwasherCancelling the wash programme Emptying the DishwasherCare and Cleaning Cleaning the FilterStances What to do, if Error messagesSymptom Possible Cause Solution END and Drying onDishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dullLower rinse aid dosing Technical DataThere are dried water drops on the glasses and dishes Bottom rack with cutlery basket Installing the Dishwasher An open-end spanner ScrewdriverBuilt-In Dishwasher Dishwashers That Can Be IntegratedFree-Standing Appliances Plinth on free-standing appliances is not adjustable Work surface must be re-mountedPermitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseExtension hoses Water drainDrain hose Sink outlet connectionElectrical Connection Leak Prevention SystemChanging a fuse Installation and Connection Instructions Connections Other Countries Hongkong Lthuania Russia Cyprus Lebanon OmanEstonia Latavia Poland Israel Malaysia Saudi ArabiaHungary SyriaEuropean Guarantee Guarantee ConditionsGreat Britain Weitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroCustomer Care 08705 929Calls may be recorded for training purposes