Electrolux 5070 manual What to do, if, Error messages, Symptom Possible Cause Solution

Page 26

Operating instructions

What to do, if ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

...Error messages

•If the END or DRYING indicator on the programme progress display is flashing, you can probably rectify the fault yourself.

After rectifying an END or DRYING fault, press the button for the wash programme that has been started. The wash programme should continue. If the fault is displayed again, contact AEG Service Force.

•If indicators for other programme steps on the programme progress display are flashing, please contact AEG Service Force and state the fault indicated.

	Symptom	Possible Cause	Solution
		Tap is closed.	Open tap.
	END on the pro-
	END on the pro-	The filter (where present) in
	gramme progress dis-	The filter (where present) in	Clean the filter in the
	gramme progress dis-	the threaded hose fitting is	Clean the filter in the
	play is flashing:	the threaded hose fitting is	threaded hose fitting.
	play is flashing:	blocked.	threaded hose fitting.
	no water is running	blocked.
	no water is running
	into the dishwasher.	The water inlet hose is not	Check hose installation.
		correctly laid.	Check hose installation.
		correctly laid.
	DRYING on the pro-	The sink outlet is blocked.	Clean the sink outlet.
	DRYING on the pro-
	gramme progress dis-	The water drain hose is not	Check hose installation.
	play is flashing.	The water drain hose is not
	play is flashing.	correctly laid.
		correctly laid.
	END and DRYING on	The leak prevention system	Close the tap and contact
	the programme	has been triggered.	AEG Service Force.
	progress display are
	flashing simultane-
	ously.

26

Image 26

Contents Ökofavorit Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General safetyCorrect Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old AppliancesAppliance Features and Control Panel Prior to using for the first time Control PanelSalt Adjust the Water SoftenerAdjust Number Hardness range of the water in your areaUse dishwasher salt Filling with Salt for the Water SoftenerFill with dishwasher salt Open the door, remove the lower rackAge the appliance Filling with Rinse AidOugh rinsing, spot and streak free drying Fill with rinse aidReplace the lid and tighten by turn- ing clockwise Adjusting Rinse Aid DosingDaily Use Loading Cutlery and Dishes Loading Cutlery To ease the loading of large items at Loading Pans, Frying Pans and Large PlatesLoad large and heavily soiled dishes in the lower rack Loading Cups, Glasses Coffee Services Raising the Upper Rack Adjusting the Height of the Upper RackLowering the Upper Rack Maximum Height of the DishesFill with Detergent Filling with DetergentUse only dishwasher detergent Tions given on the detergent packagingBio Wash Programmes and Concentrated Detergents Detergent RecommendationsSelecting the Wash Programme Programme Table Wash Programme Changing/Interrupting/CancellingStart the Wash Programme Changing the wash programmeLoad Sensing Sensor Logic Switching Off the DishwasherCancelling the wash programme Emptying the DishwasherCare and Cleaning Cleaning the FilterStances What to do, if Error messagesSymptom Possible Cause Solution END and Drying onDishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dullThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Bottom rack with cutlery basket Installing the Dishwasher An open-end spanner ScrewdriverFree-Standing Appliances Dishwashers That Can Be IntegratedBuilt-In Dishwasher Plinth on free-standing appliances is not adjustable Work surface must be re-mountedPermitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseExtension hoses Water drainDrain hose Sink outlet connectionChanging a fuse Leak Prevention SystemElectrical Connection Installation and Connection Instructions Connections Other Countries Hongkong Lthuania Russia Cyprus Lebanon OmanEstonia Latavia Poland Israel Malaysia Saudi ArabiaHungary SyriaGreat Britain Guarantee ConditionsEuropean Guarantee Weitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroCalls may be recorded for training purposes 08705 929Customer Care