Electrolux 5070 manual Installing the Dishwasher, An open-end spanner Screwdriver

Page 30

Installation and Connection Instructions

INSTALLATION AND CONNECTION INSTRUCTIONS

Installing the Dishwasher

•The dishwasher must be installed on a firm floor and adjusted such that it is stable and level.

•To compensate for unevenness in the

floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrew- ing. Depending on the design of the threaded feet use either

– an open-end spanner

– a screwdriver.

•For built-in, integrated and fully integrated dishwashers, the rear feet should be adjusted from the front of the appliance using a screwdriver.

•The drain hose, inlet hose and mains cable must be laid such that they are free to move in the rear of the plinth recess, so that they cannot be kinked or crushed.

•The dishwasher must also be screwed on tightly to the work surface or to the adjoining units. This is absolutely necessary so that its stability is guaranteed according to VDE regulations.

Image 30

Contents Ökofavorit Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General safetyCorrect Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old AppliancesAppliance Features and Control Panel Prior to using for the first time Control PanelSalt Adjust the Water SoftenerAdjust Number Hardness range of the water in your areaUse dishwasher salt Filling with Salt for the Water SoftenerFill with dishwasher salt Open the door, remove the lower rackAge the appliance Filling with Rinse AidOugh rinsing, spot and streak free drying Fill with rinse aidAdjusting Rinse Aid Dosing Daily UseReplace the lid and tighten by turn- ing clockwise Loading Cutlery and Dishes Loading Cutlery Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rackTo ease the loading of large items at Loading Cups, Glasses Coffee Services Raising the Upper Rack Adjusting the Height of the Upper RackLowering the Upper Rack Maximum Height of the DishesFill with Detergent Filling with DetergentUse only dishwasher detergent Tions given on the detergent packagingBio Wash Programmes and Concentrated Detergents Detergent RecommendationsSelecting the Wash Programme Programme Table Wash Programme Changing/Interrupting/CancellingStart the Wash Programme Changing the wash programmeLoad Sensing Sensor Logic Switching Off the DishwasherCancelling the wash programme Emptying the DishwasherCare and Cleaning Cleaning the FilterStances What to do, if Error messagesSymptom Possible Cause Solution END and Drying onDishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dullTechnical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Bottom rack with cutlery basket Installing the Dishwasher An open-end spanner ScrewdriverDishwashers That Can Be Integrated Built-In DishwasherFree-Standing Appliances Plinth on free-standing appliances is not adjustable Work surface must be re-mountedPermitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseExtension hoses Water drainDrain hose Sink outlet connectionLeak Prevention System Electrical ConnectionChanging a fuse Installation and Connection Instructions Connections Other Countries Hongkong Lthuania Russia Cyprus Lebanon OmanEstonia Latavia Poland Israel Malaysia Saudi ArabiaHungary SyriaGuarantee Conditions European GuaranteeGreat Britain Weitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjero08705 929 Customer CareCalls may be recorded for training purposes