Electrolux CHDF 6260, DF 6160 Special accessories, Changing the light bulbs

Page 10

Warning

Failure to observe the instructions on cleaning the unit and changing the filters will cause a fire hazard. You are therefore strongly recommended to follow these instructions.

The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe the above safety recommendations.

Changing the light bulb(s)

Disconnect the unit from the mains power supply.

Unlock the lighting cover (D) by twisting the bolts to the left and fold down the bulb cover. Fig. 4.

Replace the old light bulb(s) with a new light bulb of the same kind.

Close the bulb cover and relock it by twisting the bolts to the right.

If the light does not come on, make sure the bulb has been inserted correctly before contacting your local Service Force Centre.

Fig. 4 D

Special accessories

Charcoal filter Type 150 LONG LIFE

Available from your

 

 

retailer as an accessory

Charcoal filter Type 150

Available from your

 

 

retailer as an accessory

Front panel M

BF6060-m

 

942 120 646

Front panel AL

BF6060-al

 

942 120 647

Finishing strip*

 

ET-NR.:

502 426 420 02

Clips for finishing strip (3x)*

ET-NR.:

502 302 940 06

* ET-NR. contact our Service Force Centre

69

Image 10
Contents Chdf Contents Safety warnings For the userFor the installer Page Recirculation mode Extraction modeDescription of the Appliance Control Panel Metal grease filter Maintenance and CareCleaning the hood Removing the metal grease filterCharcoal filter Special accessories Changing the light bulbsWhat to do if Technical assistance service not for UK Service and Spare PartsTechnical Specifications Mounting accessories includedElectrical connection not for UK Safety warnings for the electricianElectrical connection for UK only Installation Page Page Page Page Page AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG