Installation

Preparing the wall unit - Extractor version
• The hood is supplied as an
extractor unit.
extractor unit.	190	172
Before installing the hood, drill a	190	238
Before installing the hood, drill a		238
hole in the roof of the wall unit
(see Fig. 5). This hole is to allow
passage of the outlet pipe and the
power cable, and to facilitate
servicing.

	• The wall unit must have a
	minimum body depth (without	Fig. 5
	door) of 300 mm with recessed	Fig. 5
	door) of 300 mm with recessed
	light screen and min. 370 mm with

flush-mounted light screen. The unobstructed internal height must be at least 370 mm.

Preparing the wall unit - Filter version (DF 6160)

•Before installation of the hood in the wall unit, a 115x115 mm hole for the deflector should be cut in the ceiling of the wall unit. Fig. 6-7.

•Depending on the wall unit height, you need for return air operation a pipe union or additionally a non-flammable length of pipe (Ø 100/115/ 120 mm) as far as the ceiling of the wall unit.

Fig. 6

Fig. 7