Electrolux CSG 404 installation instructions Oven cleaning cycle, General

Page 24

Care and cleaning

C S G 4 0 4

Oven cleaning cycle

You need to follow the cycle to keep the inside of the oven in good condition. The type of cooking you do will affect how often you need to follow the cycle.

If you do a lot of roasting and very little other baking you should follow the cleaning cycle once a week. If you do very little roasting you will only need to follow the cleaning cycle every 2-3 weeks.

To carry out a cleaning cycle:

1.Remove the oven shelves.

2.Set the oven to mark 5 for at least 30 minutes.

MARK 5

3.Turn the temperature up to mark 7 for 2 hours or until the oven is presentably clean. Some staining will remain.

MARK 7

Do not use any cleaning agents or scrapers on the inside of the oven. Do not wash the special finish.

You can replace the oven roof if you need to. You may order this from your supplier. When you are ordering quote part number 359001018.

General

Clean the base of the oven, the oven shelves and the oven doors while they are still slightly warm. This way you can easily remove any splashes or spills. Wipe the oven base with a cloth that has been wrung out in hot soapy water. You may use mild abrasives.

24

Image 24

Contents CSG For your safety IntroductionContents Lighting the appliance Hotplate & GrillOven To turn off any burnerPrior to using the grill Browned it on the high settingGrill Heat controlCooking positions PreheatingPositioning food on the grid Grill pan and handle Grill pan is supplied with a removable handleHotplate Burner sizesFor your safety Helpful hints Oven Heat zonesOven shelves Baking trays and dishes RoastingCondensation Oven cooking chart Mins. per ½kg 1lb and 25 mins 15 25 mins 30 40 minsRolls and buns 10 20 mins Slow cooking Food preparation slow cookingDo not cook casseroles over 2.7kg 6lb Cover food with a tight fitting lid or tin foilThaw thoroughly before cooking Left over food should be cooled quickly and refrigeratedCare and cleaning For your safety Cleaning the brass plated handles WhereHotplate When replacing hotplate burner parts Crown to body Do not try to force the crown on to the bodyGrill and oven furniture GrillOven Oven cleaning cycle GeneralCleaning The Door Glass Installing the appliance LocationMake sure that a stability bracket is fitted For further details seeAppliance dimensions PositioningCurtains behind the appliance Height to hotplate 900mm 920mmGeneral information For your safety BatteryMoving your appliance For your safety What is wrong and why? CheckService and spare parts 7 0 5 9 2 9 9 2SI G 4 0 Installation Instructions Dimensions ConnectionsGrill HotplateImportant Safety Requirements Provision for VentilationLocation of Appliance Parts Required Levelling the ApplianceFitting the Stability Bracket Connecting to GAS Fitting the BatteryPressure Testing Checking the Grill Checking the HotplateChecking LID SHUT-OFF Device Checking the OvenT E S T E S CSG404 Contents Check List Important Notice Telephone 0870 5 Part Number311692400