Electrolux EKG6046 What to do if…, To replace the inner door glass, Replacing an oven light bulb

Page 19

Warning! If the door glass panel becomes chipped or has deep scratches the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Please contact your local Service Force Centre who will be pleased to advise fur- ther.

To replace the inner door glass

1.To ensure the glass is properly located the text 'This side up' should be facing towards you at the top edge of the door and facing into the cavity.

2.Holding the glass with both hands, gently slide the glass into the side trims of the oven door.

3.To replace the trim, line up the clips on the underside of the trim with the con- nectors at the top of the door.

4.Carefully slide the trim towards the door.

5.Ensure the trim is securely in place before closing the oven door.

electrolux 19

Warning! Do not attempt to use the oven without the glass being in place.

Replacing an oven light bulb

The type of bulb required is a 300°C 25 watt small Edison Screw.

Warning! Disconnect the appliance from the electricity supply before replacing the bulb.

1.Make sure the appliance is cool before replacing the bulb.

2.Open the door and remove the shelves and wire work runners.

3.Remove the glass cover by turning it to the left.

4.Unscrew the bulb by turning it to the left.

5.Fit a new bulb and then replace the glass bulb cover.

6.Refit the wire work runners and replace the oven shelves.

7.Restore the electricity supply and reset the time of day.

What to do if…

Please carry out the following checks on your appliance before calling a Service Engineer. It may be that the problem is a simple one which you can solve yourself without the ex- pense of a service call.

In-guarantee customers should make sure that the checks have been made as the en-

gineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is re- quired for in-guarantee service calls.

Problem

The grill, ovens and timer do not work.

Possible solution

Check that the appliance has been wired in to the appliance supply and is switched on at the wall.

Image 19
Contents EKG6046 EKG6047 CookerSafety information Electrolux. Thinking of you ContentsCare and cleaning Grill and oven furniture Product descriptionControl panel ApplianceBefore first use Operation Things to note To set the timer to switch off onlyTo cancel an automatic programme To return the appliance to manualGrill Using the grillTo light the hob burners To turn off any burnerTo remove the handle Using the top ovenGrill pan handle To attach the handleTo fit the top oven shelf Using main oven conventional cookingMain oven conventional cooking Heat zones Food preparation Slow cook Joints of meat and poultry Using slow cookMain oven shelves Slow CookHelpful hints and tips Top oven cooking chart Grilling chartCooking tables Food Shelf position Gas mark Main oven cooking chartHours Food Shelf position Gas mark Cleaning the outside of the appliance Care and cleaningRoasting chart Cleaning materialsCleaning the grill Removing and replacing the wire work runnersCleaning the gas hob When replacing hob burner partsCleaning the doors Cleaning inside the grill and oven compartmentsCleaning between the outer and inner door glass To replace the inner door glass ProblemPossible solution What to do if…Problem Possible solution Installation instructions Levelling the appliance Connecting to the electricity supplyIf the fitted plug is removed Fitting the stability chain Connecting to the gas supplyIf a moulded plug is fitted LPG Flexible connections must be a type suitable forChecking the grill Pressure testingChecking the hob Checking the lid shut-off deviceTechnical data Environment concerns GB IE Guarantee/Customer ServiceTel +353 01 4090751, Email serv- ice.eid@electrolux.ie Customer CareTraining purposes 349171300-G-072009