Removing and replacing the wire work runners
1.Remove all shelves and furniture from the oven.
2.Hold the wire work at the bottom, unclip from the cavity side and gently pull to- wards the centre of the oven.
3.Unhook the runner at the top and re- move from the cavi- ty.
4.To replace the run- ners, hook the wire work side runner into the cavity, slide back and press into place.
Warning! Ensure
the wirework runners are firmly in position before replacing the oven shelves.
Cleaning the gas hob
Clean the hotplate top using a mild abrasive. Take care not to damage the spark electro- des. If the spark electrodes are damaged the burners will not light.
You can remove the pan supports, burner caps and burner crowns to clean them. Again take care not to damage the spark electrodes.
Clean the burner crowns and pan supports by soaking them in very hot soapy water. Aluminium based saucepans can leave shiny metal marks on the pan supports.
You can remove any stubborn stains by scouring with a soap impregnated steel wool pad.
If you look after the burner crowns and pan supports in this way they will stay reasonably clean.
However the surface will dull with time. After cleaning the appliance parts, dry them thor- oughly before you put them back.
When replacing hob burner parts
1.Crown to body. (Do not try to force the crown on to the body).
electrolux 17
Make sure that the hole in the crown is over the electrode. Check that the loca- tion pegs sit in the slots in the body. When the crown is in this position let it fall freely on to the body. Check that the crown can be moved slightly from side to side.
2.Cap to crown. Place cap centrally on the top of crown (enamel side up). Move side- ways and front to back to check the cap is properly fitted.
3.Check for ignition. If a burner will not light then you need to check the crown and cap positions.
Important! The 2 piece cap is only available for tripple crown burners. Not all models contain the tripple crown burner.
In cases where there are no 2 piece caps you will receive a single solid cap.
Cleaning the shelves, wire work runners and grill/oven furniture
All removable parts, except the grill pan han- dle can be washed in the dishwasher.
The grill pan, grill pan grid, oven shelves and wire work runners may be cleaned using a soap impregnated steel wool pad.
Soaking first in hot soapy water will make cleaning easier.
Cleaning the grill
Do not clean the grill burner itself. Cleaning the grill may cause the holes in the burner to become blocked preventing it from operating correctly.