Electrolux K 7 18 40 - 1i Inner door reversal, Housing dimensions, Height, Depth, Width

Page 19

Inner door reversal

1.Using a screwdriver release bracket

(1)by pressing on the internal spring and withdraw it from its seat together with the door; remove plug

(2)and fit it in the hole left open on the opposite side; turn the door through 180°, remove the bracket (1) and refit it on the opposite side.

2.Refit the door and insert the top pin and bottom bracket (1), pushing it into place.

180°

2

1

PR140

To ensure correct storage of food, the door is fitted with a simple spring device which holds it in the open position until it is properly closed.

Housing dimensions

Height	1780 mm
Depth	550 mm
Width	560 mm

19

Image 19

Contents Santo K 7 18 40 Who thinks ecologically acts accordingly Dear customerContents Prior to initial start-up SafetySafety of children Intended useAppliance Packaging Information ServiceDisposal Daily OperationDisposal of old Appliances Remove transport packagingSetting 0 Off Starting up and temperature regulationVariable Inner Door Interior AccessoriesFresh food refrigeration Storage ShelvesFreezing and storing frozen food Defrosting Preparation of Ice CubesCleaning and Care Switching off the applianceEnergy Saving Tips Cleansers which contain acetic acidSomething Not Working Symptom Possible Cause RemedyPut the refrigerator back into operation Changing the light bulb0870 5 Service and Spare PartsCustomer Care Department Guarantee Conditions Guarantee ConditionsElectrical Connection InstallationYour appliance needs air PositioningReversing the door Depth Housing dimensionsInner door reversal HeightApply joint the sealing strip as shown in figure Instructions for building-inSeparate parts A, B, C, D as shown in the figure Apply covers B into the relevant holesFix cover C on guide a until it clips into place Fix cover D on guide B until it clips into place Regulations, Standards, Guidelines2222