Electrolux K 7 18 40 - 1i Fix cover C on guide a until it clips into place

Page 22

Place guide (A) on the inside part of the furniture door, in the upper and lower positions as shown in the fig- ure and mark the position of external holes. Having drilled the holes, fix the guide with the screws supplied.

50mm	A
PR166

Fix cover (C) on guide (A) until it clips into place.

A

C

PR33

Open the appliance door and the fur- niture door at 90°. Insert the small square (B) into guide (A). Put togeth- er the appliance door and the furni- ture door and mark the holes as indi- cated in the figure. Remove the squares and drill holes with ø 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.

8mm

A

B

PR167

22

Image 22

Contents Santo K 7 18 40 Dear customer Who thinks ecologically acts accordinglyContents Intended use SafetySafety of children Prior to initial start-upDaily Operation ServiceDisposal Appliance Packaging InformationRemove transport packaging Disposal of old AppliancesStarting up and temperature regulation Setting 0 OffStorage Shelves Interior AccessoriesFresh food refrigeration Variable Inner DoorFreezing and storing frozen food Preparation of Ice Cubes DefrostingSwitching off the appliance Cleaning and CareCleansers which contain acetic acid Energy Saving TipsSymptom Possible Cause Remedy Something Not WorkingChanging the light bulb Put the refrigerator back into operation0870 5 Service and Spare PartsCustomer Care Department Guarantee Conditions Guarantee ConditionsInstallation Electrical ConnectionYour appliance needs air PositioningReversing the door Height Housing dimensionsInner door reversal DepthInstructions for building-in Apply joint the sealing strip as shown in figureApply covers B into the relevant holes Separate parts A, B, C, D as shown in the figureFix cover C on guide a until it clips into place Regulations, Standards, Guidelines Fix cover D on guide B until it clips into place2222