Electrolux FCW 300, FCW 200 manual Temperature Control

Page 8

2. INSTALLATION

6.

Connect the leads of the power supply cord to a suitable 3-pin plug as shown below (fig. 9)

Lead of cord

Pin of plug

Green/yellow

Earth

Blue

Neutral

Brown

Phase

NOW THE APPLIANCE IS READY TO START

Fig 9.

3. HOW TO USE

1.

Install and prepare the appliance as detailed under `Installation' in the previous chapter.

2.TEMPERATURE CONTROL

The thermostat ensures that the required temperature is maintained in the freezer. Adjust the temperature by turning the button with a coin that fits the groove. Turning the thermostat button towards no. „7” makes the temperature in the freezer colder, and turning the button towards no. „1” makes the temperature warmer. The inner temperature must not be lower than -15 °C.

Fig 10.

8

Image 8
Contents USER’s Manual FCW 200 ** FCW Index 13-14POWER-SUPPLY Arrangement Product DescriptionThermometer Locking SystemInstallation Location a fig Location C fig Temperature Control Control Panel OPENING/CLOSING the LIDDefrosting & Cleaning Defrosting & Cleaning ProcedureDefrosting & Cleaning Monthly DailyWeekly Trouble Shooting Appliance is not WorkingFor Storing Vaccines Abnormal Noise in the ApplianceIf the Appliance is to be Shut Down for Transportation ETC FCW 200 Vaccine Loading FCW 300 Vaccine Loading None