Starting Up - Setting the Temperature
1.Plug the mains plug into the mains socket.
2.If the display is OFF, press ON/OFF button. The alarm light flashes and the buzzer sounds.
3.Press the “I” button to stop the buzzer, the light still flashes since the temperatur is reached.
4.Press either the “B“ or “D“ button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.
5.Set the required temperature by pressing the “B“ or “D“ buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time the button is pressed the temperature is adjusted by 1 °C.
From a food safety point of view
FROSTMATIC
The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming.
1.The FROSTMATIC function is switched on by pressing the FROSTMATIC button. The yellow light illuminates.
If the FROSTMATIC function is not terminated manually, the appliance electronics switch off the FROSTMATIC function after 52 hours. The yellow light goes out.
2.The FROSTMATIC function can be terminated manually at any time by pressing the FROSTMATIC button again. The yellow light goes out.
Alarm OFF button
In the event of an abnormal temperature rise inside the freezer (e.g. power cut) warning light (G) will start to flash and a buzzer will sound.
After the temperature has returned to normal, the warning light (G) will continue to flash, although the buzzer has stopped.
When the alarm button is pressed, the warmest temperature reached in the compartment flashes on the indicator. (max. 5 seconds).
To stop the buzzer push the button “H”.
10