Rehingeing the door
The side at which the door opens can be changed from the right side (factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance may not be connected to the mains. Remove plug from the mains beforehand.
Procced as follows:
To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the door of the appliance during the operations.
Gently lay the appliance on its back.
Procced as follow:
1. Remove the ventilation grille.
2. Remove the bottom hinge (A) by unscrewing the fixing screws.
3.Remove the door.
4.Unscrew the pin of the bottom hinge (f) and refit it on the opposite side.
5.Unscrew the pin of the upper
hinge (d) and refit it on the opposite side.
6.6) Insert the door in the upper
hinge and refit the upper hinges (A).
Pay attention that the border of the doors are parallel to the top border, otherwise adjust the position of the lower hinge of the door (A).
7.Remove from the ventilation
grille the cover (e) and refit it on the opposite side.
8. Refit ventilation grille.
9. Unscrew the handle. Refit it on opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack.
22