Electrolux 75270 GA user manual Temperature setting buttons, Select Freezing or Cooling

Page 8

Temperature setting buttons

The temperature is adjusted using the “B“ and “D“ buttons. These buttons are connected to the temperature display.

•The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, “C“ or “E“.

•Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. The DESIRED temperature must be reached within 24 hours.

If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature.

DESIRED temperature means:

The temperature that has been selected for inside the freezer. The DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the freezer. The ACTUAL temperature is indicated with illuminated numbers.

Select "Freezing" or "Cooling"

If necessary, switch over the appliance with the following steps between the operating modes "Freezing" and "Cooling":

1.Hold down the SUPER button and the “+“ (WARMER) button simultaneously for 5 seconds.

•When the setting is switched from “Freezing” to “Cooling” “FC” (Freezing - Cooling) appears in the temperature display, an acoustic signal confirms the change and the temperature display changes to flashing figures (DESIRED temperature cooling mode +5 °C). Using the temperature setting buttons, the required temperature for the cooling mode can now be entered.

•When the setting is switched from “Cooling” to “Freezing” “CF” (Cooling

-Freezing) appears in the temperature display, an acoustic signal confirms the change and the temperature display changes to flashing figures (DESIRED temperature freezing mode -18 °C). Using the temperature setting buttons, the required temperature for the freezing mode can now be entered.

The operation mode, in which your appliance is at the moment, is identifiable if the temperatures can be set above or below 0 °C.

2. Set the temperature depending upon the selected operation mode (see

8

the chapter "Temperature Adjustment").

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Arctis 75270 GA Dear Customer Contents Safety Safety of childrenIntended use Prior to initial start-upDaily Operation Case of malfunctionRemove transport safeguard DisposalAppliance Packaging Information Disposal of old AppliancesOperating and indicator panel Temperature setting buttons Desired temperature meansActual temperature means Select Freezing or CoolingTemperature Adjustment Temperature displayStandard Cooling Cooling drinksStarting Up Setting the Temperature Alarm OFF buttonSwitching the Appliance off Freezing and storing frozen food Preparation of Ice Cubes Ice packDefrosting FreezerCleaning and Care After cleaning wipe with fresh water and rub drySwitching off the appliance Energy Saving TipsWhat to do if Correcting MalfunctionsHeavy build up of frost, possibly also on the door seal Service and Spare Parts Customer Care DepartmentExclusions Standard guarantee conditionsEuropean Guarantee Installation Electrical ConnectionPositioning Rear spacersProcced as follow Rehingeing the doorProcced as follows Regulations, Standards, Guidelines 2223 454-01-00-03052007 Subject to change without notice
Top Page Image Contents