Malfunction |
| Possible Cause |
| Remedy |
|
|
|
|
|
Heavy build up of frost, possibly also on the door seal.
Door seal is not air tight (possibly after changing over the hinges).
Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than approx. 50 °C). At the same time shape the warmed door seal by hand such that it sits correctly.
Appliance is not level.
The appliance is touching the
wall or other objects.
Unusual noises.A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.
The compressor does not start This is normal, no error has immediately after changing
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the component out of the way.
The compressor starts after a
the temperature setting.
occurred.
period of time.
17