Electrolux EOEE62CS Before carrying out the Pyro function, Light clean, Medium clean, Heavy clean

28 pyrolytic cleaning of the oven cavity (EPEE63CS & EPEE63CK models only) electrolux e:line ovens

cleaning the pyrolytic oven door (EPEE63CS & EPEE63CK models only) electrolux e:line ovens 29

Pyrolytic cleaning of the oven cavity (EPEE63CS & EPEE63CK models only)

Operation

If your oven has the Pyro self-cleaning function, it cleans by burning off the spatters and accumulated dirt and grease from the oven liner, at high temperature. This process produces ash which can then be wiped out

of the oven cavity.

caution

During the pyrolytic cleaning process the oven becomes extremely hot (approximately 500˚C).

•Please keep small children at a safe distance

•During pyrolytic cleaning the air outlet vent above the door must be kept clear of any obstruction (eg bulky tea towels).

•It is recommended you clean your oven regularly to keep the oven in its best condition.

•Do not use your oven to clean miscellaneous items

(eg cookware).

Before carrying out the Pyro function,

All accessories must be removed from the oven. This includes shelves, trays and side racks.

Clean large pieces of dirt or grease from the oven liner.

Note:

•As an added safety feature the Pyro cycle will not start if you have left the right hand telescopic side rack in. A switch detects the presence of the rack and will not allow Pyro to start until it is removed.

There are 3 Pyro cleaning cycles you can use.

Soiling	Duration
Light Clean	2hrs 00min
Medium clean	2hrs 30min
Heavy clean	3hrs 00min

Duration includes heat-up time and cool-down time of 45 mins.

•	Light clean
	This is an energy saving cycle that can be used on a
	regular basis if your oven is lightly soiled. Possibly after
	every 2nd or 3rd time you roast meat.
•	Medium clean
	Use this as your regular cycle about once every
	2-3 months to remove mildly dirty ovens.
•	Heavy clean
	When your oven is very dirty it may need a longer cycle
	to clean it thoroughly. This cycle will clean the dirtiest

Selecting the Pyro clean function

Select Pyro clean by using the function button.

PYRO CLEAN

pyro accept

Selecting the required cleaning cycle

Select Light, Medium or Heavy depending on the soiling of the oven. This is done by pushing the cook time button to the appropriate time.

PYRO CLEAN	2
Medium clean

pyro accept

Selecting Pyro accept

After selecting the required cleaning cycle, push the Pyro accept button and the function will then start automatically. The oven light will then go out and the Pyro function

will start.

PYRO CLEAN	2
Medium clean

pyro accept

tips and information

During Pyro cleaning the door will automatically lock when the temperature in the oven approaches 300˚C. (A lock symbol will appear on the display.)

The door will only unlock when the oven has cooled to a safe temperature. Turning the function off will not unlock the door. This will only happen when safe temperatures are reached.

Cleaning the pyrolytic oven door (EPEE63CS & EPEE63CK models only)

Your pyrolytic oven is equipped with an oven door that can be disassembled in order to clean all the panes of glass.

Positioning the door for dismantling

The door needs to be positioned at an angle to aid in the disassembly of the panes.

•Open the oven door fully and flip out the hinge locating tab to the open position.

•After the locating tab has been positioned, gently close the oven door until it stops on the locating tab. The door is now ready for dismantling.

Removing the top door trim

•Push in the 2 buttons on either side of the trim.

•Lift the trim away from the door.

Removing the glass panes

•Remove the 3 panes of glass starting with pane 1.

•When removing pane 3 ensure that the 2 rubber supports are removed before cleaning.

Do not misplace them!

Cleaning the glass panes

Clean with a damp cloth.

Do not use scouring agents or abrasive sponges as these could damage the reflective surface.

Dry thoroughly before reassembly.

Replacing the glass panes

•Replace the glass panes back into the door starting with pane 3.

•Ensure this pane is placed into the correct slot and that the 2 rubber supports are in place.

•Next replace pane 2. There is a reflective coating on this pane. This coating is indicated by a circle printed on its surface. Ensure this circle is in the same corner as pictured below.

Circle in this corner

of ovens.

Note:

•The cooling fan will operate at an increased speed for Pyro cleaning and will continue to run until the oven has cooled down. This is normal.

After Pyro cleaning

After cool-down you can wipe the ash out of the oven with a soft damp cloth and warm water.

To restore the enamel shine to more difficult areas, use a damp cloth with vinegar and detergent.

•Replace pane 1 ensuring the black screening is facing inwards towards the oven.

Replacing the top door trim

Replace the trim ensuring the clips snap into the 2 location holes. Flip the hinge locating tab back into its original position and close the door.

When the pyrolytic cleaning function is on, it is advisable not to use a cooktop if it is fitted above the oven. This could cause overheating and damage to both appliances.