Electrolux EDEE63CS, EUEE63CK Turning the oven on, Selecting a temperature, Setting the cook time

14 operating sequence – electronic control oven electrolux e:line ovens

electrolux e:line ovens cooking with the timer – electronic control oven 15

Operating sequence – electronic control oven

Cooking with the timer – electronic control oven

Turning the oven on

•Switch on the oven by pressing the “On/Off” button.

The LCD control panel will come on and inform you that you need to select a cooking function.

•If you do not select a function within 8 seconds the oven will turn off.

Selecting the Upper or Lower oven (EDEE63CS, EUEE63CS & EUEE63CK only)

Your model may be equipped with two ovens. On these models, use the oven selector button to toggle between the upper and lower ovens.

Selecting a temperature

The temperature in your appliance is electronically controlled.

•The temperature can be selected within the range of 30°C to 250°C and can be adjusted at any time. To set the temperature, press the temperature “” and temperature “” buttons to reach the desired setting.

•If no further changes are made within 8 seconds the oven begins to heat. The heating indicators above the temperature selector will come on and start to rise slowly, indicating the degree to which the oven

is currently being heated.

•When the temperature is reached, the indicator bars are fully lit, the heat source switches itself off and the buzzer will play a short sound. When the oven temperature falls below the desired setting, the heating source switches back on.

Your oven is equipped with a programmable controller that can be used to turn on and off the oven automatically. The cook time is used to automatically turn the oven off after a set amount of time.

Setting the cook time

1.Select the desired oven function and cooking temperature.

2.Press the “cook time ” button as often as necessary, until the desired cook time has been set.

3.After 8 seconds from the last time adjustment your oven will be programmed and will start cooking.

On completion of cooking

When the cook time has elapsed, an audible signal will sound for 10 seconds, the oven will switch off and COOKING FINISHED will be displayed on the left hand side of the display. On the right hand side of the display, the remaining time indication “0 min” will appear together with the cooking start and stop time.

•To stop the audible signal, press any of the buttons on the control panel.

•If you wish to cook a bit longer, press the “cook time ” button for each additional minute you require. The oven automatically reverts to the function and temperature previously programmed. This feature is available for 5 minutes after cooking has finished. After that, the oven automatically switches off.

•Select which oven to use by pressing the “upper/lower” button. The oven cavity icon on the LCD control panel will tell you which oven is currently active.

Note:

• During cooking, you can adjust the cook time with the Cook time or buttons for better cooking performance.

Note:

•The lower oven cavity does not have as many functions as the upper oven cavity.

Select a cooking function

Your oven will have a selection of functions. Refer to the inside front cover of this manual to confirm what functions are available to you.

•Press the “function ” or function ” buttons as many times as necessary until the desired function appears.

•Cooking suggestions will appear under the function name and suggested cooking temperatures will appear above the temperature selector.

•If no other button is touched within 8 seconds the oven will switch on and begin to heat up to the displayed temperature.

tips and information

Pre-heating your oven is recommended in several cooking and grilling functions. Pre-heating your appliance allows it to reach the required temperature quickly and efficiently as well as cook your food at the correct temperature for the entire cook time.

The programmable controller models are equipped with a built-in rapid heat-up that activates each time you start an oven function. During the rapid heat-up phase the heat comes from the element surrounding the fan as well as the smaller element above the food. This combination will heat up your oven 30% quicker than it would on standard “Bake”. The oven will automatically revert to the set cooking function once the preset temperature is reached.

Turning the oven off

Single cavity models:

1.	Press the On/Off button to switch off the oven.
Dual cavity models:
1.	Press the upper/lower oven selector button to toggle to

Setting the start/stop time

The start/stop time can be used to switch the oven On and Off at a specific time during the day.

1.Check the clock displays the correct time of day.

2.Select the desired oven function and cooking temperature.

3.Set the required cook time.

4.Press the “start/stop” time button to move the start and stop time forward.

5.After 8 seconds from the last time adjustment the DELAY SET icon will light and your oven is now programmed.

The oven will start cooking when the time of day reaches the set start time.

tips and information

Even though the heating element turns off the oven will still retain substantial heat. This will continue to cook the food until it is removed or the oven cools down. If you do not plan on being present when the oven turns off, you should take this extra heating time into account.

Setting the timer

The timer can be used independently of the oven for setting a countdown period. When the period of time has elapsed, an audible signal sounds.

1. Press the timer button.

2. Set the desired length of time using the or buttons whilst the timer bell is flashing. After 8 seconds from the last adjustment the timer bell will stop flashing and the timer will start to count down.

3.When the set time has elapsed, an audible signal will sound for 10 seconds. The time indication “0 min” and the timer bell will flash on the display.

4.To stop the signal, press any of the 3 buttons below the

Clock/Timer display.

	the desired oven.
2.	Press the On/Off button to switch off the desired oven.
	The LCD control panel will come off to confirm that the
	oven is now switched off.
3.	If the other oven is still active, after 1 second, the LCD
	control panel will automatically revert to show the setting
	of that oven.
4.	To turn off both ovens at once, press and hold the
	On/Off button for 1 second. All elements, cavity light
	and the LCD control panel will then switch off at the
	same time.

Note:

• 30 seconds after a programmed cooking function has started, it is no longer possible to delay the start time.

• In order to delay a cooking function that has already started, the oven needs to be switched Off using the On/Off button, then switched on again and re-programmed.

Note:

• This feature has no effect on the oven operation.