3 General information
•Once a function has been selected the corresponding function indicator will flash for approx. 5 seconds. During this time the required times can be set using the + or - button.
•After the required time has been set the function indicator will flash again for approx. 5 seconds. After this the function indicator will stay on. The set time will begin to count down.
•The acoustic signal can be deactivated by pressing any button.
•The required oven function and temperature may be selected before or af- ter setting the clock functions cook time d and end time e.
•When the cooking time has expired turn the oven function switch and the temperature selection switch back to the off position.
2 Switching Off the Time Display
By switching off the time display you can save energy.
Switching off the time display
Hold down any two buttons until the display becomes dark (approx. 10 seconds).
Switching on the time display
Hold down any two buttons until the time reappears in the display (approx. 10 seconds).
3 The display can only be switched off if none of the clock functions cook time d end time e or countdown G are in use.
16