WARM & SERVE DRAWER INSTALLATION INSTRUCTIONS
Canada
INSTALLATION AND SERVICE MUST BE PERFORMED
BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
United States
GENERAL INFORMATION: The Warm & Serve Drawer can be used as a stand alone appliance or combine with a
IMPORTANT: The warmer drawer must be installed on a leveled surface from left to right, rear to front and the surface must be capable of supporting 100 lbs (45,4 Kg).
Warm & Serve Drawer Dimensions
IMPORTANT: The Warm & Serve Drawer runs off a single phase
C
B
F
D
E
Minimum distance to floor 4½" (11,4 cm)
A.HEIGHT 10 ¾" (27,3 cm)
D.cutout height
Min. | 9 7/8" (25,1 cm) |
Max. | 10 ¼" (26 cm) |
|
|
60" (152,4 cm) Cord
Warm and Serve
Drawer
A
Warm and Serve
Cutout
FLOOR
B. WIDTH |
| C. Depth |
29" (73,7 cm) |
| 23 3/8" (59,4 cm) |
E. cutout |
| F. cutout |
| ||
width |
| depth |
28 ½" (72,4 cm) |
| 23 5/8" (60 cm) |
28 ¾" (73 cm) |
| 24" (61 cm) |
|
|
|
Combination Warm & Serve Drawer/
Built-in Oven Installation
Caution: Two 3" (7,6 cm) wide X 3/4" (1,9 cm) thick planks have to be install and they should be able to support 200 pounds. (90,7 Kg)
| of oven cutout |
29½" | Bottom |
| |
(74,9cm) |
|
H* = 11 5/8" (29,5cm) Min. is a Critical dimension and has to be respected.
J** = 3" (7,6cm) Max. Electrical Junction Box for wall oven must be lower than warmer drawer cutout.
| A. HEIGHT | B. WIDTH | C. Depth | ||
10 ¾" (27,3 cm) | 29" (73,7 cm) | 23 3/8" (59,4 cm) | |||
|
|
|
|
|
|
| D. cutout | E. cutout | F. cutout | G. HEIGHt | |
|
| height | width | depth |
|
Min. |
| 9 7/8" (25,1 cm) | 28 ½" (72,4 cm) | 24" (61 cm) | 1 ¾" (4,4 cm) |
Max. |
| 10 ¼" (26 cm) | 28 ¾" (73 cm) |
| Depends on critical |
|
|
|
|
| dimension H |
P/N 318201808 (0901) Rev. C
| English – pages | |
| Español – páginas | |
Printed in the USA | Français – pages | |
1