Electrolux 241540105 (0612) manual To connect the water supply to the rear of your refrigerator

Page 10

10Connecting The Water Supply

To connect the water supply to the rear of your refrigerator:

1Ensure that the refrigerator is not plugged in.

2Flush the supply line until water is clear by placing the end of the copper tube in a sink or bucket and opening the shut-off valve.

NOTE

3Unscrew the plastic cap from the water valve inlet at the rear of your refrigerator. Discard the cap.

4Slide the brass compression nut, then the ferrule (sleeve) onto copper tube.

5Push the copper tube into water valve inlet as far as it will go (1/4 inch).

6Slide the ferrule (sleeve) into valve and finger-tighten the compression nut onto valve. Tighten another half turn with a wrench. Do not over-tighten.

7Secure the copper tube to your refrigerator’s rear panel with a steel clamp and screw (see illustration).

8Coil the excess copper tubing (about 2½ turns) behind your refrigerator as shown. Arrange coiled tubing to avoid vibration or wear against other surfaces.

9Open water supply shut-off valve and tighten any connections that leak.

After connecting the water supply, see page 22 for information about priming an empty water supply system. Also read all topics in the “Automatic Ice & Water Dispenser” section to learn about normal operating procedures.

Image 10

Contents

Use & Care Guide Please Read and Save this Guide Finding InformationMake a Record for Quick Reference Table of Contents General Safety SafetyImportant Safety Instructions Child SafetyElectrical Information Required Tools Removing The Doors Getting Through Narrow Spaces To prepare for removing the doorsTo remove the top hinge cover To remove the refrigerator doorTo remove the freezer door About Your REFRIGERATOR’S Water Supply Connecting The Water SupplyWhat you will need To connect the water supply to the rear of your refrigerator Feature Overview Understanding Features and TermsSetting Cooling Temperatures Controls & SettingsAllowing Cooling Time Before USE What To Do If The Temperature Displays Flash Making Temperature AdjustmentsChoosing Fahrenheit or Centigrade SYSTEM-MONITORING Alarms Responding to Alarms Audible Tones & Indicator LightsUsing The Alarm Reset Button Checking the Air Filter StatusTurning the Cooling System on and OFF Cantilever Shelves Storage FeaturesShelf Features To change the position of a shelfCrisper Humidity Control DrawersCrispers Meat KeeperDoors To change the position of an adjustable door binStorage Bins Accessories Dispensing Ice Using the DispenserAutomatic Ice & Water Dispenser Dispensing WaterUsing the Dispenser Control Panel Express Ice ButtonPriming the Water Supply System To prime the water supply systemICE Dispenser Operation & Care Using The Ice Dispenser After InstallationTurning The Ice Dispenser On And Off Cleaning The Ice Dispenser Ice Dispenser TipsTo clean the ice dispenser Remove and empty the ice storage bin ifReplacing the AIR Filter Changing The FilterLocating the Filters Water FilterOrdering Replacement Filters Replacing the Water Filter More About Your Advanced Water FilterTo replace your pure advantageTM water filter Storing Food & Saving Energy Ideas for Storing FoodsIdeas for Saving Energy InstallationTemperature Settings Loading the FreezerNormal Operating Sounds & Sights Understanding the Sounds YOU MAY HearCare & Cleaning Protecting Your InvestmentCare & Cleaning Tips Vacation & Moving TipsReplacing Light Bulbs To replace light bulbsWarranty Information ConsumerSolutions To Common Problems Before YOU CallTemperatures Are Too Warm Water/Moisture/Frost Outside Refrigerator Ice Dispenser Opening/Closing Of Doors/Drawers