Electrolux 241540105 (0612) Priming the Water Supply System, To prime the water supply system

Page 23

Automatic Ice & Water Dispenser 23

PRIMING THE WATER SUPPLY SYSTEM

Your refrigerator’s water supply system includes several tubing lines, an advanced water filter, a distribution valve bank, and a reserve tank to ensure ample supply to the ice and water dispenser at all times. This system needs to be completely filled with water when first connected to an external supply line.

!CAUTION

For proper dispenser operation, recommended water supply pressure should fall between 20 psi and 100 psi. Excessive pressure may cause water filter to malfunction.

To prime the water supply system:

1Begin filling the tank by pressing and holding a drinking glass against the water dispenser paddle.

2Keep the glass in this position until water comes out of the dispenser. It may take about 1½ minutes.

3Continue dispensing water for about 3 minutes to flush the system and plumbing connections of any impurities (stopping to empty the glass as necessary).

NOTE

The water dispenser has a built-in device that shuts off the water flow after 3 minutes of continuous use. To reset this shutoff device, simply release the dispenser paddle.

!CAUTION

Pushing the dispensing paddle in for more than 4 minutes may cause the dispenser motor to overload and stop. The overload protector resets automatically after 3-4 minutes.

Image 23

Contents

Use & Care Guide Make a Record for Quick Reference Finding InformationPlease Read and Save this Guide Table of Contents Child Safety SafetyImportant Safety Instructions General SafetyElectrical Information To prepare for removing the doors Removing The DoorsGetting Through Narrow Spaces Required ToolsTo remove the refrigerator door To remove the top hinge coverTo remove the freezer door What you will need Connecting The Water SupplyAbout Your REFRIGERATOR’S Water Supply To connect the water supply to the rear of your refrigerator Understanding Features and Terms Feature OverviewAllowing Cooling Time Before USE Controls & SettingsSetting Cooling Temperatures Choosing Fahrenheit or Centigrade Making Temperature AdjustmentsWhat To Do If The Temperature Displays Flash Responding to Alarms Audible Tones & Indicator Lights SYSTEM-MONITORING AlarmsChecking the Air Filter Status Using The Alarm Reset ButtonTurning the Cooling System on and OFF To change the position of a shelf Storage FeaturesShelf Features Cantilever ShelvesMeat Keeper DrawersCrispers Crisper Humidity Control Storage Bins To change the position of an adjustable door bin Doors Accessories Dispensing Water Using the DispenserAutomatic Ice & Water Dispenser Dispensing IceExpress Ice Button Using the Dispenser Control PanelTo prime the water supply system Priming the Water Supply SystemTurning The Ice Dispenser On And Off Using The Ice Dispenser After InstallationICE Dispenser Operation & Care Ice Dispenser Tips Cleaning The Ice DispenserRemove and empty the ice storage bin if To clean the ice dispenserWater Filter Changing The FilterLocating the Filters Replacing the AIR FilterOrdering Replacement Filters More About Your Advanced Water Filter Replacing the Water FilterTo replace your pure advantageTM water filter Ideas for Storing Foods Storing Food & Saving EnergyLoading the Freezer InstallationTemperature Settings Ideas for Saving EnergyUnderstanding the Sounds YOU MAY Hear Normal Operating Sounds & SightsProtecting Your Investment Care & CleaningVacation & Moving Tips Care & Cleaning TipsTo replace light bulbs Replacing Light BulbsConsumer Warranty InformationBefore YOU Call Solutions To Common ProblemsTemperatures Are Too Warm Water/Moisture/Frost Outside Refrigerator Ice Dispenser Opening/Closing Of Doors/Drawers