![](/images/new-backgrounds/1041260/4126033x1.webp)
Storage Features 17
CANTILEVER SHELVES
!CAUTION
To avoid injury from breakage, handle tempered glass shelves carefully.
You can easily adjust shelf positions in the freezer and fresh food compartments to suit your needs. The shelves have mounting brackets, which attach to slotted supports at the rear of each compartment.
To change the position of a shelf: |
| Tighten spacers | |
| to remove shelf. | ||
1 | Before adjusting a shelf, remove all food. |
| 1 |
|
| ||
2 | Lift the front edge up. | 2 | 3 |
3 | Pull the shelf out. |
| |
|
| ||
4 | Replace by inserting the mounting bracket hooks into the |
|
|
| desired support slots. |
|
|
5 | Lower the shelf and lock into position. | 1 |
|
|
| ||
Shelf Features |
|
| |
Your refrigerator includes SpillSafeTM glass shelves, which are |
|
| |
designed to catch and hold accidental spills. These shelves |
|
| |
slide out for easy access to food and faster cleaning. | Loosen spacers | ||
|
| ||
|
| to stabilize shelf | |
Sliding shelves can be pulled forward as far as their | against liner. | ||
|
| ||
stops allow. Sliding shelves cannot be separated from their |
|
| |
mounting brackets. |
|
| |
NOTE |
| Cantilever Aspect | |
| Glass Shelf | ||
|
|
|
The Cantilever Sliding Glass Shelf has spacers (side screws) on the sides of the brackets to securely hold the shelf in place.
To relocate the shelf to a different location, the spacers must be turned in (clockwise). To secure the shelf in a new location, remember to turn the spacers out (counterclockwise) until they touch the sides of the compartment.