Electrolux 241540105 (0612) manual Controls & Settings, Allowing Cooling Time Before USE

Page 12

12Controls & Settings

ALLOWING COOLING TIME BEFORE USE

To ensure reliable food storage, allow your refrigerator and freezer to operate with the doors closed for 8 to 12 hours before placing food inside. During this cooling period, you do not need to adjust the controls, which are preset at the factory.

SETTING COOLING TEMPERATURES

Your refrigerator comes with a state-of-the-art electronic digital control system. The system’s control panel is located at the top of the the fresh food compartment.

The two digital displays on the left half of the control panel indicate the current temperatures of your freezer and fresh food compartments.

To adjust the temperature to a higher or lower setting, press the Up or Down Arrow button closest to the display. The first time you press the button, the display shows the last setting you entered. Each press of the button after that increments the setting by one degree.

The display shows your new setting momentarily, then changes back to the current temperature. (Refer to page 13 for more about temperature settings.)

NOTE

The advanced electronic control system in your refrigerator includes additional display modes that service professionals can use to rapidly diagnose performance issues.

Image 12

Contents

Use & Care Guide Finding Information Please Read and Save this GuideMake a Record for Quick Reference Table of Contents Safety Important Safety InstructionsGeneral Safety Child SafetyElectrical Information Removing The Doors Getting Through Narrow SpacesRequired Tools To prepare for removing the doorsTo remove the top hinge cover To remove the refrigerator door To remove the freezer door Connecting The Water Supply About Your REFRIGERATOR’S Water SupplyWhat you will need To connect the water supply to the rear of your refrigerator Feature Overview Understanding Features and TermsControls & Settings Setting Cooling TemperaturesAllowing Cooling Time Before USE Making Temperature Adjustments What To Do If The Temperature Displays FlashChoosing Fahrenheit or Centigrade SYSTEM-MONITORING Alarms Responding to Alarms Audible Tones & Indicator LightsUsing The Alarm Reset Button Checking the Air Filter StatusTurning the Cooling System on and OFF Storage Features Shelf FeaturesCantilever Shelves To change the position of a shelfDrawers CrispersCrisper Humidity Control Meat KeeperTo change the position of an adjustable door bin DoorsStorage Bins Accessories Using the Dispenser Automatic Ice & Water DispenserDispensing Ice Dispensing WaterUsing the Dispenser Control Panel Express Ice ButtonPriming the Water Supply System To prime the water supply systemUsing The Ice Dispenser After Installation ICE Dispenser Operation & CareTurning The Ice Dispenser On And Off Cleaning The Ice Dispenser Ice Dispenser TipsTo clean the ice dispenser Remove and empty the ice storage bin ifChanging The Filter Locating the FiltersReplacing the AIR Filter Water FilterOrdering Replacement Filters Replacing the Water Filter More About Your Advanced Water FilterTo replace your pure advantageTM water filter Storing Food & Saving Energy Ideas for Storing FoodsInstallation Temperature SettingsIdeas for Saving Energy Loading the FreezerNormal Operating Sounds & Sights Understanding the Sounds YOU MAY HearCare & Cleaning Protecting Your InvestmentCare & Cleaning Tips Vacation & Moving TipsReplacing Light Bulbs To replace light bulbsWarranty Information ConsumerSolutions To Common Problems Before YOU CallTemperatures Are Too Warm Water/Moisture/Frost Outside Refrigerator Ice Dispenser Opening/Closing Of Doors/Drawers