Electro-Voice X-Line Very Compact (XLVC) manual Xlvc-Bgk

ALWAYS MAKE SURE THAT THE QUICK-RELEASE PINS ON THE HINGE BARS FULLY LOCK INTO THE HOLES IN THE FRONT RIGGING TUBES ON BOTH THE ENCLOSURE AND THE GRID.

ALWAYS MAKE SURE THAT THE LEFT AND RIGHT SWING ARMS ON THE ENCLOSURE ARE LOCKED INTO THE SAME HOLES FOR THE SAME VERTICAL SPLAY ANGLE ON THE GRID.

ALWAYS MAKE SURE THAT THE QUICK-RELEASE PINS FOR EVERY SWING ARM PASS THROUGH THE HOLE IN THE SWING ARM AND ARE FULLY LOCKED IN THE RIGGING CHANNELS IN THE GRID.

The AGCD adapter grid may also be used to stack an XLD281 enclosure on top of an XLC subwoofer. Figure 11b shows an XLD281 stacked on top of an XLC215 subwoofer.

XLC Button

Bar

(Set of 2)

XLC Grid

XLC Series

Loudspeaker

Note: XLVC-BGK

Sold Separately

XLVC Series

Loudspeaker

XLVC-BGK

Bottom Grid Kit

(Set of 2 Hinge

Bars and Swing

Arms along with

8 Pins)

AGCD

Adapter Grid

XLC Swing Arm

XLC Series

AGCD

Adapter Grid

(Set of 2)

Loudspeaker

XLVC Series Loudspeaker

XGS-3

Groundstack

Figure 11a:	Figure 11b:
Using the AGCD Adapter Grid	Using the AGCD Adapter Grid
for Flying Arrays	for Groundstacking Arrays

33 ELECTRO-VOICE®X-Line Very CompactTM Rigging Manual