Clocks and Timers (Digital Display)
Clocks and Timers (Analog Clock)
Controls
3.Set the Oven Function selectorto the desiredfunction – BAKE, CONVECTION BAKE, OR TRUCONVEC™, etc.
4.Set the temperature control knob to the desired baking temperature.
5.The automatic time bake programis now set!
NOTE: The display will continueto show the amountof bake time that was programmed (this will remainuntil the programmed start time is reached). You can return the display to clock mode by pressing the “CLOCK/PROBE” button – Notice that a small clock will be displayed in the upper right corner to indicate that a program is in progress. Switchback to the timermode by pressing
Synchronizing the Analog and Digital Clocks
(Premiere Models)
1.Press the “timer” and “start time” buttons simultaneously.
2.Turn the “Set” knob to move the hands on the analog clock to any time setting.
3.After five seconds the display will go blank. Press the “timer” button and using the “Set” knob, set the digital time to the exact time on the analog clock.
timer | bake | Set | start | probe | |
hours | time | temp | |||
| |||||
|
|
|
|
|
Product
Product
the “BAKE HOURS” button.
6.When the specified time is reached,the oven will automatically turn on. It will bake for the programmedamount of time at the selected temperature.
NOTE:At one minutefromthe end of the specifiedbake program, the oven timer will beep once. At the end of the specified bake program, the oven will automatically turn off and the timer will sound a series of three beeps. This will continueuntil the “START TIME” buttonis pressed. The displaywill then returnto displaying the time.
NOTE: Setting the remaining durationtime to :00 will cancel the Automatic Bake program.
This will synchronize the two clocks. You cannow set the time of day.
Setting the Min/Sec Timer
The Min/Sec Timer is designed for accurate timing and is ideal for baking delicate items such as biscuits, cookies, and popovers, and for precise broiling. The Min/Sec timer can be used at the same time the Bake Hours or Start Time functions are in use. It can be used for timing up to 24 hours.
To program the Min/SecTimer
1.Push and release the “timer” button.
2.Rotate “Set” knob until desired duration of time is displayed. Timer starts seconds after “Set” knob stops rotating. A tone indicates the timer has started.
When the timer has one minute remaining, the timer will sound twice and begin to countdown by seconds. A tone will sound three times indicating the time is complete and twice every ten seconds after completion until timer function is cleared.
NOTE: Press any function button to clear a completed cycle or function.
Controls
15 | 16 |