Bose AM262838_00_V manual Setting Zone 2 Protocol

Setting Up

Setting Zone 2 Protocol

For the Acoustimass® 5 or 20 powered speaker system to work properly with a Lifestyle® media center, you will need to check the Zone 2 Protocol to ensure that it is set to Normal mode (Figure 14 a).

1.While your Lifestyle® system is on, press the Settings button on your remote control. This will open the on-screen display.

2.Scroll down with the down-arrow button and select System Setup using the Enter button.

3.You will now see a menu entitled System Setup (1 of 3). Scroll down to “more...”.

Continue to scroll down through (2 of 3) to (3 of 3). The last item on System Setup (3 of 3) is Zone 2 Protocol.

4.If necessary, use the right-arrow button to set the protocol from Legacy to Normal.

5.If you changed the Zone 2 Protocol, shut off the system and turn it on again; this ensures that the Zone 2 Protocol is reset to Normal mode.

Figure 14 a

Setting Zone 2 Protocol

On		Mute	Mute
Off		All
	SOURCE	/ INPUT
CD/DVD	Changer	FM/AM
	TV	VCR	AUX
	MENU / NAVIGATION
			Settings
	Tune
	Disc
Seek	Enter
Channel
Chapter			Volume
Preset
Track
1	2		3
4	5		6
7	8		9
	0
	PLAYBACK
Stop	Pause		Play
Shuffle			Repeat

Settings ( )

Settings

System Setup Enter

System Setup (3 of 3)

Zone 2 Protocol: Normal

Connecting power to your system

CAUTION: If you purchased a dual-voltage system, it is important that you set the speakers to the correct voltage. To do this, refer to “Selecting the correct voltage” on page 6.

Follow these steps to connect power to your Acoustimass powered speaker system:

1.Plug the power cord from the Acoustimass module into an AC power (mains) outlet.

2.Insert the power cords of the Lifestyle® system into an AC power (mains) outlet.

3.Turn the Acoustimass module power switch to the On position.

AM262838_00_V.pdf December 20, 2001 13