Setting Up
Select the locations for your speaker system (cont.)
Acoustimass® module location
Follow these guidelines to select a location for the Acoustimass module.
1.Place the module along the same wall as the speakers, if possible.
2.Select a convenient location – under a table, behind a sofa. Do not allow furniture or drapes to block the ventilation openings of the module.
3.Place the module within reach of the audio input cable, speaker cables, and an AC power (mains) outlet.
4.Select a position for the Acoustimass module (Figure 3). For proper ventilation, place it on the long edge, with the connectors facing the floor. An alternate position is on its largest side, with the bass and treble controls facing up. Do not place the module on either end, as shown by the last two views in Figure 3.
Figure 3
Acoustimass module positions
Preferred
position
Alternate position
5.Once you have selected a position for the module, place the four
6.Aim the port (the round opening) into the room or along the wall to avoid blocking the port or creating too much bass.
7.For best bass performance, do not place the port at equal distances from any two walls or from a wall and the ceiling.
Before making connections, unplug your system
It is important that you unplug your Lifestyle® system or other music source before making any connections.
Selecting the correct voltage
If you purchased a dual voltage product, please be sure that your speakers are set to the correct voltage for your geographical area. Use the adapter plug provided when appropriate.
Figure 4
Voltage selector switch settings
CAUTION: Do not cover the ventilation openings of the Acoustimass module. The slots on the end provide ventilation for the
Note:To avoid interference with the TV picture, place the Acoustimass module at least 18 inches (45 cm) from a TV.
6 | December 20, 2001 | AM262838_00_V.pdf |