Cuisinart DLC-5 manual Additional Information, Cleaning and Storing

Page 12

ADDITIONAL

INFORMATION

TROUBLESHOOTING GUIDE

These are some problems that beginners with a food processor sometimes experience, along with their solutions.

Food is unevenly chopped

Either you are trying to process too much food at one time, or you are running the machine continuously instead of pulse/chopping until pieces of food are no larger than 1/2-inch (1.25cm) pieces.

Liquid leaks from bottom of work bowl onto motor base

Remove work bowl from base as soon as you finish processing. Do not remove metal blade first. When work bowl and blade are removed together, blade drops down and forms an almost perfect seal against bowl.

Liquid leaks out between work bowl and cover when machine is running

You added too much liquid. Never use more than 2 cups (480ml) of a very thin liquid. The thicker the liquid, the more you can use. With thick mixtures like pancake or cake batter, for example, you can process as much as 4 cups (950ml).

Slices are uneven or slanted

Pack feed tube more carefully. Maintain even pressure on pusher.

Carrots or similar food falls over in feed tube

Cut food into pieces of equal size, not over 4 inches (10cm) long. Use enough pieces to fit feed tube snugly. Cut carrots in half and insert one piece point side down and other stem-side down.

Sliced or shredded food piles up on one side or work bowl

This is normal. Remove disc occasionally and even out processed food. When food gets close to bottom of disc, empty bowl.

A few pieces of food remain on top of slicing or shredding disc.

This is normal. Save remaining pieces of food in plastic bag for later use. Vegetable scraps can be puréed for soups or used to thicken sauces or stews. In every case, there would be more waste if you sliced or shredded the food by hand.

Cheese spreads out and collects on top of shredding disc

Cheese was not cold enough, or pressure on pusher was too great. Always use light pres- sure when processing cheese.

CLEANING AND STORING

Keep your food processor ready for use on a kitchen counter. When it’s not being used, leave it unplugged. Don’t leave it with the cover in the locked position; this could damage the on-off mechanism.

Store blades and discs in a safe, convenient place, as you would sharp knives – out of reach of children. All parts except motor base are dishwasher safe and we recommend washing them in the dishwasher on the top rack only. Due to intense water heat, washing the work bowl, work bowl cover or accessories on the bottom rack, may cause damage over time. Insert work bowl upside down. Remember where you place sharp blades and discs, and unload dishwasher carefully.

To simplify cleaning, rinse work bowl, cover, pusher and blade or disc immediately after use so food won’t dry on them.

If you wash blades and discs by hand, do it carefully. Avoid leaving them in soapy water, where they may disappear from sight. To clean metal blade, fill work bowl with soapy water, hold blade by its center plastic part and move it up and down on center shaft. Use of a spray attachment is also effective. If necessary, use a brush.

Work bowl is made of Lexan® polycarbonate plastic, which is shatter resistant and heat- resistant, dishwasher and microwave-safe.

Chopping certain foods may scratch or cloud work bowl. Among them are ice, whole spices, coffee beans and essential oils like wintergreen. If you like to prepare your own spice blends, you may want to keep a second bowl just for that purpose.

Base housing is made of tough plastic with high impact resistance. Its smooth surface will look new for years. Keep a sponge handy as you work and wipe spills from base. Four rub- ber feet on underside of base keep it from moving on most work surfaces when machine is processing heavy loads. Clean feet from time to time; if rubber surface is not clean, machine may move on counter. If feet leave spots on counter, spray with spot remover and wipe with damp sponge. If any trace of spot remains, repeat procedure and wipe area with damp sponge and nonabrasive cleaning powder.

IMPORTANT: Never store any blade or disc on motor shaft. No blade or disc should be placed on shaft except when processor is in use.

11

Image 12
Contents Food Processor When Removing Blade Important Unpacking InstructionsSafeguards Table of ContentsMachine Includes IntroductionAssembly Instructions Operating ControlsRemoving Processed Food To chop raw fruits and vegetablesTo purée fruits and cooked vegetables To dislodge food To chop hard foodsTo chop parsley and other fresh herbs To chop meat, poultry, fish and seafoodTo make peanut butter and other nut butters To make flavored butters, spreads and dipsTo make mayonnaise To beat egg whitesTo make cake mix TipRound fruits and vegetables Whole peppers are an exceptionTechniques For Slicing Shredding Slicing Meat Poultry Cleaning and Storing Additional InformationSafety Repacking For ShipmentDLC-5 is intended for Household Use Only Warranty Recipes Cheese SpreadGuacamole SalsaRosy Gazpacho Onion SoupColeslaw Capered Tuna SpreadMeatloaf or Meatballs Chili Bolognese Sauce for PastaCarmelized Onion Gruyère Quiche Baked Stuffed Pork ChopsLacy Potato Pancakes Sweet Potato BakeShredded Carrots Zucchini Classic Mayonnaise With Cooked Eggs Classic ViniagrettePeanut Butter Chocolate SauceWhite Bread BreadsticksHarvest Rolls Whole Wheat VariationCorn Bread Zucchini BreadApricot Bran Muffins Chocolate Cake Standard CAKE-MIX CakeCarrot Cake Cream Cheese FrostingChocolate Chip Cookies Brownies PIE PastryApple Streusel PIE Very Berry Sauce Very Berry CheesecakeIB-4275A

DLC-5 specifications

The Cuisinart DLC-5 is a classic food processor that has earned a reputation for its reliability and efficiency in the kitchen. This versatile appliance is designed to make food preparation faster and easier, catering to both novice cooks and experienced chefs alike.

One of the main features of the Cuisinart DLC-5 is its powerful motor. The 500-watt motor provides consistent performance, effortlessly handling a variety of tasks such as chopping, slicing, grating, and mixing. The 5-cup work bowl is perfect for smaller meal prep, allowing users to quickly process ingredients without the need for larger, bulkier appliances.

The DLC-5 includes a variety of handy accessories that enhance its functionality. It comes equipped with a stainless steel chopping blade, which is ideal for finely chopping vegetables, nuts, and herbs. Additionally, the processor features two slicing discs, one for thin slices and another for thicker cuts, giving users the flexibility to achieve the desired texture for their ingredients. The grating disc is an excellent tool for shredding cheese or vegetables, making it easy to incorporate into recipes.

One of the standout characteristics of the Cuisinart DLC-5 is its simple operation. The user-friendly controls enable anyone to operate the processor with ease. The machine features a pulse control, which provides precise control over the food processing process. This allows for better texture control, ensuring that ingredients are not over-processed.

In terms of design, the Cuisinart DLC-5 boasts a compact and sturdy construction. Its lightweight design makes it easy to move and store, while the sleek exterior allows it to blend seamlessly into various kitchen aesthetics. The work bowl is constructed from durable plastic, and the lid features a sealing gasket to help prevent leaks during processing.

Cleaning the DLC-5 is a breeze, as many of the components, including the bowls and blades, are dishwasher safe. This feature significantly reduces the time and effort required for post-cooking cleanup.

Overall, the Cuisinart DLC-5 Food Processor is an exceptional kitchen tool that combines power, versatility, and ease of use. Its thoughtful design and included accessories make it a valuable addition to any culinary workspace, helping users to create delicious meals with minimal fuss. Whether you’re dicing onions for a stir-fry or shredding carrots for a salad, this food processor delivers consistent and reliable results time after time.