Viking F20670D manual Performance Checklist, Designer Series-Touch Control

Performance Checklist

A qualified installer should carry out the following checks:

hCheck oven Bake Function—bake element on full power, center and outside broil elements at partial power. Convection Bake function—bake and broil elements the same with the convection fan “ON”.

hCheck TruConvec™ function—TruConvec element (behind convection fan cover) “ON” and convection fan “ON”.

hCheck High Broil function—both broil elements at full power. Convection broil function is the same with convection fan “ON”.

hCheck Medium Broil function—inner and outer broil elements pulse on and off.

hCheck Low Broil function—inner broil element only.

hCheck Self-Clean function—Door will lock in approximately 30 seconds, the center and outside broil elements will turn “ON” and the bake element will turn “ON” at partial power. Check broil elements through window to make sure they are “ON”, then abort self-clean cycle to unlock door.

CAUTION

DO NOT run self-clean cycle check for more than 10 minutes with the oven racks and rack supports inside oven to avoid discoloration due to the high temperature.

Any adjustments necessary that are a result of the installer not following instructions will be the responsibility of the installer, dealer, or the end user of the product.

Performance Checklist (cont.)

Designer Series

Self-Clean	Electronic	Temperature	Off/On
Indicator Light	Timing Center	Control	Indicator Light

Interior	Oven Function Selector
Oven Light Control

Designer Series–Touch Control			Interior
	Function Keys	Digital Display	Oven Light
			Control

Electronic Timing	Control	Digital Input Keys
Center	Panel Lock

16 17